# First Project - Mash Paddle

**URL:** <https://community.inventables.com/t/first-project-mash-paddle/19954>\
**Category:** Projects\
**Created:** [February 11, 2016, 2:04am UTC](https://community.inventables.com/t/first-project-mash-paddle/19954 "2016-02-11T02:04:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JeffWalkington](https://avatars.discourse-cdn.com/v4/letter/j/e0b2c6/32.png) [@JeffWalkington](https://community.inventables.com/u/JeffWalkington)\
**Post date:** [February 11, 2016, 2:04am UTC](https://community.inventables.com/t/first-project-mash-paddle/19954/1 "2016-02-11T02:04:18Z")

</div>

![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/5/6/56dcb0dd0ffa66d441a0efe62c55399cb202de25.jpg) ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/a/f/afbf7365cd5a905f1802271e46fadee5cc190a77.jpg)

This is my first real project excluding test cuts. It’s a mash paddle (for home brewing) shaped like a sequoia. I learned a lot about what not to do and got the machine all dialed in in the process. It was something like 2.5 hours of cutting. Tell what you think.

---

<div class="post-metadata">

**Author:** ![DavidYerkes](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/davidyerkes/32/72394_2.png) [@DavidYerkes](https://community.inventables.com/u/DavidYerkes)\
**Post date:** [February 11, 2016, 2:31am UTC](https://community.inventables.com/t/first-project-mash-paddle/19954/2 "2016-02-11T02:31:32Z")

</div>

Very nice.