# First carve

**URL:** <https://community.inventables.com/t/first-carve/21203>\
**Category:** Projects\
**Created:** [March 12, 2016, 2:33am UTC](https://community.inventables.com/t/first-carve/21203 "2016-03-12T02:33:18Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MarcusRoach](https://avatars.discourse-cdn.com/v4/letter/m/3e96dc/32.png) [@MarcusRoach](https://community.inventables.com/u/MarcusRoach)\
**Post date:** [March 12, 2016, 2:33am UTC](https://community.inventables.com/t/first-carve/21203/1 "2016-03-12T02:33:18Z")

</div>

This is my first carve took about 22 min to run using a .125 end mill happy with how it came out my daughter likes it and that’s who it was for so that make me happy .750 thick oak ply letters .5 depth

 ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/0/1/016693953d713ca18c600cbfeaf05219f753eeb4.jpg)

---

<div class="post-metadata">

**Author:** ![DavidWestley](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/davidwestley/32/78138_2.png) [@DavidWestley](https://community.inventables.com/u/DavidWestley)\
**Post date:** [March 13, 2016, 2:09am UTC](https://community.inventables.com/t/first-carve/21203/2 "2016-03-13T02:09:38Z")

</div>

Looks great.  
Wish my first work had looked that nice…

---

<div class="post-metadata">

**Author:** ![MarcusRoach](https://avatars.discourse-cdn.com/v4/letter/m/3e96dc/32.png) [@MarcusRoach](https://community.inventables.com/u/MarcusRoach)\
**Post date:** [March 13, 2016, 3:00am UTC](https://community.inventables.com/t/first-carve/21203/3 "2016-03-13T03:00:31Z")

</div>

Thank you I’m about to post a second carve I did today and a short wright up on it