# Error code 8 and after com3 access denied a good mix of problems!

**URL:** <https://community.inventables.com/t/error-code-8-and-after-com3-access-denied-a-good-mix-of-problems/59785>\
**Category:** Troubleshooting\
**Created:** [August 27, 2018, 7:26pm UTC](https://community.inventables.com/t/error-code-8-and-after-com3-access-denied-a-good-mix-of-problems/59785 "2018-08-27T19:26:26Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![NeilFerreri1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/neilferreri1/32/84403_2.png) [@NeilFerreri1](https://community.inventables.com/u/NeilFerreri1)\
**Post date:** [August 27, 2018, 9:43pm UTC](https://community.inventables.com/t/error-code-8-and-after-com3-access-denied-a-good-mix-of-problems/59785/5 "2018-08-27T21:43:57Z")

</div>

The router is a huge source of that electrical noise.  
Check out @HaldorLonningdal’s comment here:  
[Help, Random loss of connection during carve - #16 by HaldorLonningdal](https://community.inventables.com/t/help-random-loss-of-connection-during-carve/59704/16)

---

_[View the full topic](https://community.inventables.com/t/error-code-8-and-after-com3-access-denied-a-good-mix-of-problems/59785)._