# Easle software and UGCS

**URL:** <https://community.inventables.com/t/easle-software-and-ugcs/23693>\
**Category:** Uncategorized\
**Created:** [May 14, 2016, 6:08am UTC](https://community.inventables.com/t/easle-software-and-ugcs/23693 "2016-05-14T06:08:24Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![LarryM](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/larrym/32/51450_2.png) [@LarryM](https://community.inventables.com/u/LarryM)\
**Post date:** [May 14, 2016, 12:02pm UTC](https://community.inventables.com/t/easle-software-and-ugcs/23693/2 "2016-05-14T12:02:22Z")

</div>

Easel is a complete design to machine program. You don’t need anything else to start using your X-carve. It’s a great place to start.

This is a quick overview of the V-carve Pro workflow:

> [@V\_Carve Pro (Desktop) workflow overview](https://community.inventables.com/t/v-carve-pro-desktop-workflow-overview/17656):
>
> V-Carve Pro generates a G-code file. You will need the Inventables Post Processor for V-Carve here: It’s the X\_Carve\_PostP.zip file. If you took the defaults for the V\_Carve Pro installation, unzip this file into: C:\ProgramData\Vectric\VCarve Pro\V8.0\My\_PostP Once you get the project generated in V\_Carve Pro and set up your toolpaths, use the save toolpath option in V\_Carve Pro. This saves the G-code into a file that Universal G-code Sender (UGCS) can read and send to the X-Carve, (NOTE: E…

---

_[View the full topic](https://community.inventables.com/t/easle-software-and-ugcs/23693)._