# Easel and millright mega v

**URL:** <https://community.inventables.com/t/easel-and-millright-mega-v/161313>\
**Category:** 3rd Party Machines\
**Created:** [July 7, 2025, 9:02pm UTC](https://community.inventables.com/t/easel-and-millright-mega-v/161313 "2025-07-07T21:02:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![DennisKeahey1](https://avatars.discourse-cdn.com/v4/letter/d/278dde/32.png) [@DennisKeahey1](https://community.inventables.com/u/DennisKeahey1)\
**Post date:** [July 7, 2025, 9:02pm UTC](https://community.inventables.com/t/easel-and-millright-mega-v/161313/1 "2025-07-07T21:02:27Z")

</div>

I have asked this question a few times with no response. I have a mega v and only used it a few times before life got in the way. I have contacted Millright to get the proper codes, reset machine, deleted multiple times and nothing works. When I start the process to carve, i bring it to left corner, drop router touch corner then hit raise bit. I will raise all the way to the top and then slam to the rear of machine. Seth helped me couple years ago and it worked for a while. Nothing has changed except i stopped using it for a while. Any help will be greatly appreciated.

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [October 5, 2025, 9:02pm UTC](https://community.inventables.com/t/easel-and-millright-mega-v/161313/2 "2025-10-05T21:02:32Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.