# Dw660 mount- Easel

**URL:** <https://community.inventables.com/t/dw660-mount-easel/33160>\
**Category:** Projects\
**Created:** [January 22, 2017, 6:47pm UTC](https://community.inventables.com/t/dw660-mount-easel/33160 "2017-01-22T18:47:48Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![JustinBrower](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@JustinBrower](https://community.inventables.com/u/JustinBrower)\
**Post date:** [January 22, 2017, 6:47pm UTC](https://community.inventables.com/t/dw660-mount-easel/33160/1 "2017-01-22T18:47:48Z")

</div>

I’m changing my spindle to a DW660 that I already have. Does anyone have a mount for it drawn up in Easel? Or have the Gcode for it? I find a lot of mounts with drawings, but since Easel is the only software I use, I don’t have a way to actually cut them.

---

<div class="post-metadata">

**Author:** ![HungNguyen](https://avatars.discourse-cdn.com/v4/letter/h/d9b06d/32.png) [@HungNguyen](https://community.inventables.com/u/HungNguyen)\
**Post date:** [January 22, 2017, 7:52pm UTC](https://community.inventables.com/t/dw660-mount-easel/33160/2 "2017-01-22T19:52:20Z")

</div>

The DW660 spindle mount offered by Inventables is less than $30. It’s an option rather thanthan machining it yourself.

[https://www.inventables.com/technologies/dewalt-dw660-spindle-mount](https://www.inventables.com/technologies/dewalt-dw660-spindle-mount)

---

<div class="post-metadata">

**Author:** ![JustinBrower](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@JustinBrower](https://community.inventables.com/u/JustinBrower)\
**Post date:** [January 22, 2017, 8:31pm UTC](https://community.inventables.com/t/dw660-mount-easel/33160/3 "2017-01-22T20:31:12Z")

</div>

I really want a two piece design, and using two of these isnt an option because of cost and the fact that the dw660 is tapered. I need the design to be as rigid as possible as I am cutting a lot of aluminum. There is one in the Shapeoko Wiki, but I cant get Easel to take to take any version of it.

---

<div class="post-metadata">

**Author:** ![WillAdams](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/willadams/32/67263_2.png) [@WillAdams](https://community.inventables.com/u/WillAdams)\
**Post date:** [January 22, 2017, 9:04pm UTC](https://community.inventables.com/t/dw660-mount-easel/33160/4 "2017-01-22T21:04:11Z")

</div>

There is now an SVG version which should load into Easel — please check the dimensions:

> **[Shapeoko CNC Router, Rigid, Accurate, Reliable, and Affordable](https://carbide3d.com/shapeoko/)**
>
> Learn about the Shapeoko CNC Routers. They're fast, accurate, and reliable so you can make amazing projects to keep, give as gifts, or sell.

---

<div class="post-metadata">

**Author:** ![JustinBrower](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@JustinBrower](https://community.inventables.com/u/JustinBrower)\
**Post date:** [January 24, 2017, 7:01pm UTC](https://community.inventables.com/t/dw660-mount-easel/33160/5 "2017-01-24T19:01:41Z")

</div>

Thanks! These worked great. I did have to scale them, and shim the upper to get the alignment correct, but they work great! I plan to add some side plates between them for mounting my GoPro and air nozzle. I cut these with a 1/4" bit, so I had to cut the split in the front on the bandsaw.

Here they are cut out of 3/8" UHMW

[![](http://i150.photobucket.com/albums/s97/justinb3325/Mobile%20Uploads/20170123_175824_zpslluo2cek.jpg)](http://s150.photobucket.com/user/justinb3325/media/Mobile%20Uploads/20170123_175824_zpslluo2cek.jpg.html)

[![](http://i150.photobucket.com/albums/s97/justinb3325/Mobile%20Uploads/20170122_155623_zpsj9s4vevm.jpg)](http://s150.photobucket.com/user/justinb3325/media/Mobile%20Uploads/20170122_155623_zpsj9s4vevm.jpg.html)

[![](http://i150.photobucket.com/albums/s97/justinb3325/Mobile%20Uploads/20170123_175831_zpsirkyym2g.jpg)](http://s150.photobucket.com/user/justinb3325/media/Mobile%20Uploads/20170123_175831_zpsirkyym2g.jpg.html)