# Divots in the corners

**URL:** <https://community.inventables.com/t/divots-in-the-corners/75949>\
**Category:** Uncategorized\
**Created:** [August 6, 2019, 2:34pm UTC](https://community.inventables.com/t/divots-in-the-corners/75949 "2019-08-06T14:34:34Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![EderMarinez](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/edermarinez/32/68486_2.png) [@EderMarinez](https://community.inventables.com/u/EderMarinez)\
**Post date:** [December 2, 2021, 12:52pm UTC](https://community.inventables.com/t/divots-in-the-corners/75949/21 "2021-12-02T12:52:31Z")

</div>

I’m stumped as well. The issue is happening with both the 1/4  
“ inventables v bit and this amana one as well.  
I’ll check the backlash now.

---

<div class="post-metadata">

**Author:** ![EderMarinez](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/edermarinez/32/68486_2.png) [@EderMarinez](https://community.inventables.com/u/EderMarinez)\
**Post date:** [December 2, 2021, 3:30pm UTC](https://community.inventables.com/t/divots-in-the-corners/75949/22 "2021-12-02T15:30:43Z")

</div>

So I made the carves deeper .6 for “magic” &  
.09 for “ A” and now the divots basically disappeared. I would have thought they would be more pronounced. Might it be a grbl issue?

 ![image](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/a/7/a79f42c42e76f582051b3f30d68296a95dd0fe84.jpeg)

[Previous page](https://community.inventables.com/t/divots-in-the-corners/75949.md?page=1)