# Distorted carving **URL:** \ **Category:** 3018\ **Created:** [July 29, 2021, 4:54pm UTC](https://community.inventables.com/t/distorted-carving/120620 "2021-07-29T16:54:36Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![WayneThtasher](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynethtasher/32/77285_2.png) [@WayneThtasher](https://community.inventables.com/u/WayneThtasher)\ **Post date:** [July 29, 2021, 4:54pm UTC](https://community.inventables.com/t/distorted-carving/120620/1 "2021-07-29T16:54:36Z")
The foxalian 4040 did he carving. It looks like the X plain is not square with the Y plain. ---
**Author:** ![SethCNC](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/sethcnc/32/87515_2.png) [@SethCNC](https://community.inventables.com/u/SethCNC)\ **Post date:** [July 29, 2021, 5:00pm UTC](https://community.inventables.com/t/distorted-carving/120620/2 "2021-07-29T17:00:46Z")
Wayne, FoxAlien sells a number of machines under the header of 4040. Likely loosening the Spoinboard and the frame connections in the corners and then pulling into equal diagonal measurements before re-tightening will resolve your issue, however you will get the most accurate information within the FoxAlien Facebook group found Here: [FoxAlien CNC Router & Laser Machine Group | Facebook](https://www.facebook.com/groups/715689485864421) ---
**Author:** ![PhillipLunsford](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/philliplunsford/32/33614_2.png) [@PhillipLunsford](https://community.inventables.com/u/PhillipLunsford)\ **Post date:** [July 29, 2021, 6:29pm UTC](https://community.inventables.com/t/distorted-carving/120620/3 "2021-07-29T18:29:19Z")
@WayneThtasher here is a playlist on the FOXAlien machines. Included is a complete setup. [https://youtube.com/playlist?list=PLWUBjmT-017Bkhu0AK2nH8PpdzkwHsdx3](https://youtube.com/playlist?list=PLWUBjmT-017Bkhu0AK2nH8PpdzkwHsdx3)