# Different Zero Axis

**URL:** <https://community.inventables.com/t/different-zero-axis/80225>\
**Category:** Uncategorized\
**Created:** [November 8, 2019, 9:42pm UTC](https://community.inventables.com/t/different-zero-axis/80225 "2019-11-08T21:42:35Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![GregoryAHolder](https://avatars.discourse-cdn.com/v4/letter/g/ac8455/32.png) [@GregoryAHolder](https://community.inventables.com/u/GregoryAHolder)\
**Post date:** [November 8, 2019, 9:42pm UTC](https://community.inventables.com/t/different-zero-axis/80225/1 "2019-11-08T21:42:35Z")

</div>

Hi, Im very new to Easel so Im learning. I want to start out in a different position than the zero axis. Can someone please explain how to do this. Thank you.

---

<div class="post-metadata">

**Author:** ![RussellCrawford](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RussellCrawford](https://community.inventables.com/u/RussellCrawford)\
**Post date:** [November 8, 2019, 10:53pm UTC](https://community.inventables.com/t/different-zero-axis/80225/2 "2019-11-08T22:53:54Z")

</div>

You can change your home position when you’re setting up your carve. Do you have an example of what you’re trying to do?  
Thanks  
Russell

---

<div class="post-metadata">

**Author:** ![PhillipLunsford](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/philliplunsford/32/33614_2.png) [@PhillipLunsford](https://community.inventables.com/u/PhillipLunsford)\
**Post date:** [November 9, 2019, 3:19am UTC](https://community.inventables.com/t/different-zero-axis/80225/3 "2019-11-09T03:19:28Z")

</div>

@GregoryAHolder Here is a video that may help. [https://youtu.be/hjhjowXbFqM](https://youtu.be/hjhjowXbFqM)

---

<div class="post-metadata">

**Author:** ![HaldorLonningdal](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/haldorlonningdal/32/72377_2.png) [@HaldorLonningdal](https://community.inventables.com/u/HaldorLonningdal)\
**Post date:** [November 10, 2019, 1:54pm UTC](https://community.inventables.com/t/different-zero-axis/80225/4 "2019-11-10T13:54:17Z")

</div>

Easel zero point is always in its XY0 position.  
You can place your design with the lower left corner at XY0, or move the design around, for instance center the design over XY0.