# Dedicated workbench finished!

**URL:** <https://community.inventables.com/t/dedicated-workbench-finished/15790>\
**Category:** Projects\
**Created:** [November 14, 2015, 8:55pm UTC](https://community.inventables.com/t/dedicated-workbench-finished/15790 "2015-11-14T20:55:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![KeddyKleinbergs](https://avatars.discourse-cdn.com/v4/letter/k/a6a055/32.png) [@KeddyKleinbergs](https://community.inventables.com/u/KeddyKleinbergs)\
**Post date:** [November 14, 2015, 8:55pm UTC](https://community.inventables.com/t/dedicated-workbench-finished/15790/1 "2015-11-14T20:55:32Z")

</div>

When I got my X-Carve, I assembled it in my house and then got so darned excited to use the thing I started carving inside. Just got done with my workbench out in the garage and It’s all set up and ready to carve in it’s new home!

 ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/2X/d/dd1eec28b5731505ade78b731f569c89271a152f.JPG)

 ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/2X/e/e83e88c4dc8a41199f088cef2baf5c113f0ca601.JPG)

 ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/2X/7/78ac0c0c72a97cc90f937b4a7d1cb53d2186333d.JPG)

 ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/2X/9/9fbf880a1d92d3a49d029d27c2ab81449ae19815.JPG)

 ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/2X/1/1ce866f1fe198fef7a9451d18817accecedd0459.JPG)