# Dead on boxes

**URL:** <https://community.inventables.com/t/dead-on-boxes/76217>\
**Category:** Projects\
**Created:** [August 13, 2019, 12:10am UTC](https://community.inventables.com/t/dead-on-boxes/76217 "2019-08-13T00:10:17Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![AdamLuff](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/adamluff/32/87225_2.png) [@AdamLuff](https://community.inventables.com/u/AdamLuff)\
**Post date:** [August 13, 2019, 12:10am UTC](https://community.inventables.com/t/dead-on-boxes/76217/1 "2019-08-13T00:10:17Z")

</div>

After a lot of tinkering, I can now make dead on boxes that fit one and other…even lipped.

> **[Dead on boxes](https://site.inventables.com/projects/dead-on-boxes)**
>
> I was asked by my daughters to make some boxes for them, one for a set of tarot cards and the other for a small piece of jewelry.
> 
> One tutorial to show how I made the lipped box, the Tarot box was using the same process, but no lipped edges.

---

<div class="post-metadata">

**Author:** ![RussellCrawford](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RussellCrawford](https://community.inventables.com/u/RussellCrawford)\
**Post date:** [August 13, 2019, 12:26am UTC](https://community.inventables.com/t/dead-on-boxes/76217/2 "2019-08-13T00:26:09Z")

</div>

Awesome, I was following your other post on the boxes, I’m glad you got it worked out and Thanks for sharing the project.

---

<div class="post-metadata">

**Author:** ![AdamLuff](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/adamluff/32/87225_2.png) [@AdamLuff](https://community.inventables.com/u/AdamLuff)\
**Post date:** [August 13, 2019, 1:07am UTC](https://community.inventables.com/t/dead-on-boxes/76217/3 "2019-08-13T01:07:29Z")

</div>

Next thing to figure out is Russian Dolls…they are so full of themselves…😂

---

<div class="post-metadata">

**Author:** ![RussellCrawford](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RussellCrawford](https://community.inventables.com/u/RussellCrawford)\
**Post date:** [August 13, 2019, 7:17pm UTC](https://community.inventables.com/t/dead-on-boxes/76217/4 "2019-08-13T19:17:50Z")

</div>

I have enough trouble with American Dolls 😳😁😂😂