# Cutting problem

**URL:** <https://community.inventables.com/t/cutting-problem/74918>\
**Category:** X-Carve\
**Created:** [July 6, 2019, 3:12pm UTC](https://community.inventables.com/t/cutting-problem/74918 "2019-07-06T15:12:32Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![GiorgiKevkhishvili](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/giorgikevkhishvili/32/67759_2.png) [@GiorgiKevkhishvili](https://community.inventables.com/u/GiorgiKevkhishvili)\
**Post date:** [July 6, 2019, 3:12pm UTC](https://community.inventables.com/t/cutting-problem/74918/1 "2019-07-06T15:12:32Z")

</div>

Hello. I have a problem, can not you tell me what should be caused by this, such a cutting, I think that the belt problem I bought but it is still on the way …

 ![66275624_350816822183765_5271280157712187392_n](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/9/8/98a6b257d2d1cf6097d1d95c092088cdc8764181.jpg) ![66642177_313290079559169_3419453266570772480_n](https://yyz1.discourse-cdn.com/flex009/images/transparent.png)

I have never had such a problem, new cnc size 1750 mm x1750 mm workBee, X controller.

---

<div class="post-metadata">

**Author:** ![KimberlyFranzen](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/kimberlyfranzen/32/48458_2.png) [@KimberlyFranzen](https://community.inventables.com/u/KimberlyFranzen)\
**Post date:** [July 6, 2019, 11:19pm UTC](https://community.inventables.com/t/cutting-problem/74918/2 "2019-07-06T23:19:20Z")

</div>

Did you use Easel to design your carve? Can you share the project so wecan take a look at the intended toolpath, compared to what you got?

---

<div class="post-metadata">

**Author:** ![GiorgiKevkhishvili](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/giorgikevkhishvili/32/67759_2.png) [@GiorgiKevkhishvili](https://community.inventables.com/u/GiorgiKevkhishvili)\
**Post date:** [July 7, 2019, 6:41am UTC](https://community.inventables.com/t/cutting-problem/74918/3 "2019-07-07T06:41:04Z")

</div>

This is a project I have noticed about this problem

[https://easel.inventables.com/projects/Hk1vfINa2vzGX1OyCgtvfg](https://easel.inventables.com/projects/Hk1vfINa2vzGX1OyCgtvfg)

I also have X carve 500x500 when I’m preparing it no problem.  
X cavre 500x500 does not control x controller

---

<div class="post-metadata">

**Author:** ![HaldorLonningdal](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/haldorlonningdal/32/72377_2.png) [@HaldorLonningdal](https://community.inventables.com/u/HaldorLonningdal)\
**Post date:** [July 7, 2019, 7:28am UTC](https://community.inventables.com/t/cutting-problem/74918/4 "2019-07-07T07:28:00Z")

</div>

Lack of sufficient rigidity for the cutting forces applied.

When the bit plunge/retract there are almost no sideway force applied to X/Y-axis but when it start to cut the bit is pulled sideways in opposite direction from the cutting forces. So it deflects, **any machine** will do this to a certain extent but the amount os less on larger/professional machines. (which also usually offer tool compensation for defelction, wear etc)

---

<div class="post-metadata">

**Author:** ![GiorgiKevkhishvili](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/giorgikevkhishvili/32/67759_2.png) [@GiorgiKevkhishvili](https://community.inventables.com/u/GiorgiKevkhishvili)\
**Post date:** [July 7, 2019, 8:46am UTC](https://community.inventables.com/t/cutting-problem/74918/5 "2019-07-07T08:46:39Z")

</div>

thanks. I thought about it too … the solution is something? There is no small mechanism for such an error because of the size … What solution can be found?

[https://youtu.be/WdVkcFfHoOY](https://youtu.be/WdVkcFfHoOY)
