# Cutting 1" deep with 1/16" downcut bit

**URL:** <https://community.inventables.com/t/cutting-1-deep-with-1-16-downcut-bit/40723>\
**Category:** X-Carve\
**Created:** [August 12, 2017, 7:45pm UTC](https://community.inventables.com/t/cutting-1-deep-with-1-16-downcut-bit/40723 "2017-08-12T19:45:55Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![JustinBusby](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/justinbusby/32/30906_2.png) [@JustinBusby](https://community.inventables.com/u/JustinBusby)\
**Post date:** [August 13, 2017, 1:24am UTC](https://community.inventables.com/t/cutting-1-deep-with-1-16-downcut-bit/40723/5 "2017-08-13T01:24:30Z")

</div>

In addition, a search of this forum:

> [@Longer 1/16" end mill](https://community.inventables.com/t/longer-1-16-end-mill/35617):
>
> need help with locating an end mill. 1/8" or 1/4" shank 1/16" diameter cut min 1/2" length of cut. longer is better. max 1" cut. I love you inventables, but I can’t find this in your store. [https://www.inventables.com/technologies/solid-carbide-2-flute-spiral-upcut-ball-nose-end](https://www.inventables.com/technologies/solid-carbide-2-flute-spiral-upcut-ball-nose-end)[https://www.inventables.com/technologies/solid-carbide-upcut-fish-tail-spiral-bits](https://www.inventables.com/technologies/solid-carbide-upcut-fish-tail-spiral-bits) - 1/16 has cut length of 0.31 in. I have several of this bit and love it. found this option at they are $30-35 each depending …

---

_[View the full topic](https://community.inventables.com/t/cutting-1-deep-with-1-16-downcut-bit/40723)._