# Cut depth from bottom to top

**URL:** <https://community.inventables.com/t/cut-depth-from-bottom-to-top/115063>\
**Category:** X-Carve\
**Created:** [March 12, 2021, 2:51pm UTC](https://community.inventables.com/t/cut-depth-from-bottom-to-top/115063 "2021-03-12T14:51:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![WilliamVerna](https://avatars.discourse-cdn.com/v4/letter/w/848f3c/32.png) [@WilliamVerna](https://community.inventables.com/u/WilliamVerna)\
**Post date:** [March 12, 2021, 2:51pm UTC](https://community.inventables.com/t/cut-depth-from-bottom-to-top/115063/1 "2021-03-12T14:51:31Z")

</div>

Anyone have any issues with the cut death being different from the bottom of project to top? I thought it may just be a warped board so I used my planer to make it completely flat, tried another cut and getting same issue.

---

<div class="post-metadata">

**Author:** ![HaldorLonningdal](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/haldorlonningdal/32/72377_2.png) [@HaldorLonningdal](https://community.inventables.com/u/HaldorLonningdal)\
**Post date:** [March 12, 2021, 3:30pm UTC](https://community.inventables.com/t/cut-depth-from-bottom-to-top/115063/2 "2021-03-12T15:30:01Z")

</div>

Is your spoil board surface truly parallell to the Z-height?