# Create a PCD on a circle

**URL:** <https://community.inventables.com/t/create-a-pcd-on-a-circle/61252>\
**Category:** Uncategorized\
**Created:** [September 28, 2018, 10:16am UTC](https://community.inventables.com/t/create-a-pcd-on-a-circle/61252 "2018-09-28T10:16:13Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ShaneCoskerie](https://avatars.discourse-cdn.com/v4/letter/s/4bbf92/32.png) [@ShaneCoskerie](https://community.inventables.com/u/ShaneCoskerie)\
**Post date:** [September 28, 2018, 10:16am UTC](https://community.inventables.com/t/create-a-pcd-on-a-circle/61252/1 "2018-09-28T10:16:13Z")

</div>

Hi … I’m fairly new to Easel and slowly working my way around how things work , I have a project that requires some holes around a disc … I was curious to know if there is a simple way to set up a PCD of 6 holes … anyone tried this ?

---

<div class="post-metadata">

**Author:** ![HaldorLonningdal](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/haldorlonningdal/32/72377_2.png) [@HaldorLonningdal](https://community.inventables.com/u/HaldorLonningdal)\
**Post date:** [September 28, 2018, 10:44am UTC](https://community.inventables.com/t/create-a-pcd-on-a-circle/61252/2 "2018-09-28T10:44:19Z")

</div>

Radial Array:

- Open Easel, create an object (hole for instance)
- Click to select this object and goto Easel/Apps/Radial Array
- Select number, spacing and click okay.

---

<div class="post-metadata">

**Author:** ![ShaneCoskerie](https://avatars.discourse-cdn.com/v4/letter/s/4bbf92/32.png) [@ShaneCoskerie](https://community.inventables.com/u/ShaneCoskerie)\
**Post date:** [September 28, 2018, 8:22pm UTC](https://community.inventables.com/t/create-a-pcd-on-a-circle/61252/3 "2018-09-28T20:22:30Z")

</div>

Thank you for sharing this Haldor … I tried the hole option but that wouldn’t work , so I tried a small circle and yes after some trials I have that mastered … thanks again for your help