# Controller for dewalt 611 **URL:** \ **Category:** Uncategorized\ **Created:** [June 23, 2017, 3:57pm UTC](https://community.inventables.com/t/controller-for-dewalt-611/39098 "2017-06-23T15:57:51Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![BrianBrooks](https://avatars.discourse-cdn.com/v4/letter/b/e19b73/32.png) [@BrianBrooks](https://community.inventables.com/u/BrianBrooks)\ **Post date:** [June 23, 2017, 3:57pm UTC](https://community.inventables.com/t/controller-for-dewalt-611/39098/1 "2017-06-23T15:57:51Z")
Is there a controller for the dewalt 611 or only the stock inventables spindles ---
**Author:** ![PatrickLesher](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/patricklesher/32/67409_2.png) [@PatrickLesher](https://community.inventables.com/u/PatrickLesher)\ **Post date:** [June 23, 2017, 4:15pm UTC](https://community.inventables.com/t/controller-for-dewalt-611/39098/2 "2017-06-23T16:15:49Z")
It depends on what you mean controller. You can get a relay to turn the 611 on and off but I don’t know of a nice way to control the speed. Most people turn the speed all the way down or up just a little from the lowest setting and leave it. There are a lot of posts on the relay. I’ll let Phil send his usual response with the pretty picture 😉 ---
**Author:** ![JustinBusby](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/justinbusby/32/30906_2.png) [@JustinBusby](https://community.inventables.com/u/JustinBusby)\ **Post date:** [June 23, 2017, 4:40pm UTC](https://community.inventables.com/t/controller-for-dewalt-611/39098/4 "2017-06-23T16:40:54Z")
The Dewalt has an integrated speed controller. It is a manual setting and usually only needs to be set to speed 1 and left alone. All you can do, as previously mentioned, is turn it on and off. There is a SuperPID (search for it) that modifies the Dewalt to make it act more like a spindle with Xcontroller RPM control but that will void the Dewalt warranty and is not necessarily for novice users. ---
**Author:** ![WillAdams](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/willadams/32/67263_2.png) [@WillAdams](https://community.inventables.com/u/WillAdams)\ **Post date:** [June 23, 2017, 6:51pm UTC](https://community.inventables.com/t/controller-for-dewalt-611/39098/5 "2017-06-23T18:51:21Z")
There’s a bit on each of the options here: [Shapeoko CNC Router, Rigid, Accurate, Reliable, and Affordable](https://www.shapeoko.com/wiki/index.php/Spindle_Control) — we’d be glad of more.