# Controler not coming on

**URL:** <https://community.inventables.com/t/controler-not-coming-on/141461>\
**Category:** Uncategorized\
**Created:** [March 7, 2023, 1:58am UTC](https://community.inventables.com/t/controler-not-coming-on/141461 "2023-03-07T01:58:47Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![TimVicario](https://avatars.discourse-cdn.com/v4/letter/t/919ad9/32.png) [@TimVicario](https://community.inventables.com/u/TimVicario)\
**Post date:** [March 7, 2023, 1:58am UTC](https://community.inventables.com/t/controler-not-coming-on/141461/1 "2023-03-07T01:58:47Z")

</div>

i was parking my machine and it wouldnt stop bouncing i hit the emergency stop turned it back on but had no power is there a resect button on the controler

---

<div class="post-metadata">

**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\
**Post date:** [March 7, 2023, 2:14am UTC](https://community.inventables.com/t/controler-not-coming-on/141461/2 "2023-03-07T02:14:59Z")

</div>

Pull the E stop up and twist it.

---

<div class="post-metadata">

**Author:** ![TimVicario](https://avatars.discourse-cdn.com/v4/letter/t/919ad9/32.png) [@TimVicario](https://community.inventables.com/u/TimVicario)\
**Post date:** [March 7, 2023, 3:28am UTC](https://community.inventables.com/t/controler-not-coming-on/141461/3 "2023-03-07T03:28:54Z")

</div>

thanks wayne i did that nothing happened so i played with it can get the power light to com on but will not stay on . do they sell new e stop

---

<div class="post-metadata">

**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\
**Post date:** [March 7, 2023, 11:56am UTC](https://community.inventables.com/t/controler-not-coming-on/141461/4 "2023-03-07T11:56:35Z")

</div>

I am sure they do but it is hard to think by using it once that it is shot.

---

<div class="post-metadata">

**Author:** ![SethCNC](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/sethcnc/32/87515_2.png) [@SethCNC](https://community.inventables.com/u/SethCNC)\
**Post date:** [March 7, 2023, 1:14pm UTC](https://community.inventables.com/t/controler-not-coming-on/141461/5 "2023-03-07T13:14:48Z")

</div>

> [@WayneHall](#):
>
> but it is hard to think by using it once that it is shot.

I 100% agree with that assesment @WayneHall

@TimVicario you might want to open the Xcontroller and verify the internals are good before ordering a new E-Stop Button/Switch. The E-stop uses a snap in switch that could, possibly, come loose if smashed hard enough…  
Here’s some documentation on the Xcontroller that way you’re not going in totally blind. 😃

> **[X-Carve Instructions: X-Controller Assembly](https://x-carve-instructions.inventables.com/upgrade/step3/1assembly/)**
>
> X-Carve Instructions

---

<div class="post-metadata">

**Author:** ![TimVicario](https://avatars.discourse-cdn.com/v4/letter/t/919ad9/32.png) [@TimVicario](https://community.inventables.com/u/TimVicario)\
**Post date:** [March 12, 2023, 6:31pm UTC](https://community.inventables.com/t/controler-not-coming-on/141461/6 "2023-03-12T18:31:27Z")

</div>

thanks to all for your help . i had to leave the next day after the post. just git home took the e stop apart cleaned it up found the button on the switch was stuck. again thanks to all

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [June 10, 2023, 6:31pm UTC](https://community.inventables.com/t/controler-not-coming-on/141461/7 "2023-06-10T18:31:59Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.