# Contents List/ missing items **URL:** \ **Category:** Troubleshooting\ **Created:** [October 27, 2015, 6:57pm UTC](https://community.inventables.com/t/contents-list-missing-items/15032 "2015-10-27T18:57:50Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![DerekDouglas](https://avatars.discourse-cdn.com/v4/letter/d/5f8ce5/32.png) [@DerekDouglas](https://community.inventables.com/u/DerekDouglas)\ **Post date:** [October 27, 2015, 6:57pm UTC](https://community.inventables.com/t/contents-list-missing-items/15032/1 "2015-10-27T18:57:50Z")
Hi All, have just received my x-carve and have a few content problems, the first being missing screws 25286-21 Button Head Cap Screw M5 x 25mm used to apply tension to the belts, has this been replaced with a different length bolt? secondly, out of my 10 eccentric nuts, 2 of them have no thread in them. so i guess my build is on hold until I can get replacements thanks in advance Dougie ---
**Author:** ![Tarry\_Brindle](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/tarry_brindle/32/32229_2.png) [@Tarry\_Brindle](https://community.inventables.com/u/Tarry_Brindle)\ **Post date:** [October 27, 2015, 6:59pm UTC](https://community.inventables.com/t/contents-list-missing-items/15032/2 "2015-10-27T18:59:09Z")
@DerekDouglas Your best bet is to call Inventables now so they can send you some replacements. (312) 775-7009 ---
**Author:** ![DerekDouglas](https://avatars.discourse-cdn.com/v4/letter/d/5f8ce5/32.png) [@DerekDouglas](https://community.inventables.com/u/DerekDouglas)\ **Post date:** [October 27, 2015, 7:00pm UTC](https://community.inventables.com/t/contents-list-missing-items/15032/3 "2015-10-27T19:00:59Z")
thanks, Am from the UK, so do I call them direct or would I need to go through my supplier? ---
**Author:** ![Tarry\_Brindle](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/tarry_brindle/32/32229_2.png) [@Tarry\_Brindle](https://community.inventables.com/u/Tarry_Brindle)\ **Post date:** [October 27, 2015, 7:02pm UTC](https://community.inventables.com/t/contents-list-missing-items/15032/4 "2015-10-27T19:02:21Z")
Good question! I would say the supplier, but I honestly don’t know for sure. ---
**Author:** ![DerekDouglas](https://avatars.discourse-cdn.com/v4/letter/d/5f8ce5/32.png) [@DerekDouglas](https://community.inventables.com/u/DerekDouglas)\ **Post date:** [October 27, 2015, 7:04pm UTC](https://community.inventables.com/t/contents-list-missing-items/15032/5 "2015-10-27T19:04:26Z")
Thanks again, will email them and see what they say. ---
**Author:** ![Tarry\_Brindle](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/tarry_brindle/32/32229_2.png) [@Tarry\_Brindle](https://community.inventables.com/u/Tarry_Brindle)\ **Post date:** [October 28, 2015, 2:02pm UTC](https://community.inventables.com/t/contents-list-missing-items/15032/6 "2015-10-28T14:02:15Z")
Were you able to get assistance from the supplier? ---
**Author:** ![DerekDouglas](https://avatars.discourse-cdn.com/v4/letter/d/5f8ce5/32.png) [@DerekDouglas](https://community.inventables.com/u/DerekDouglas)\ **Post date:** [October 29, 2015, 8:43am UTC](https://community.inventables.com/t/contents-list-missing-items/15032/7 "2015-10-29T08:43:41Z")
Spoke to Sam at inventables and they have told me to send them a list of what I am missing and they will send it out to me, so am just working through the rest of the build to make sure nothing else is missing before sending in my list. ---
**Author:** ![Tarry\_Brindle](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/tarry_brindle/32/32229_2.png) [@Tarry\_Brindle](https://community.inventables.com/u/Tarry_Brindle)\ **Post date:** [October 29, 2015, 2:41pm UTC](https://community.inventables.com/t/contents-list-missing-items/15032/8 "2015-10-29T14:41:04Z")
Good deal! They have always been extremely helpful when an issue comes up! By far the best customer support I have ever experienced! ---
**Author:** ![RobertMatusiewicz](https://avatars.discourse-cdn.com/v4/letter/r/53a042/32.png) [@RobertMatusiewicz](https://community.inventables.com/u/RobertMatusiewicz)\ **Post date:** [October 29, 2015, 2:53pm UTC](https://community.inventables.com/t/contents-list-missing-items/15032/9 "2015-10-29T14:53:28Z")
Writing as another UK based XC user, although I have absolutely no complaints about the service from Inventables imho it would be helpful if Robbosavvy stocked spares and consumables so that replacement nuts/wheels/belts could be obtained “locally”. Even with Inventables excellent service it can take 10 days for stuff to cross the pond, clear customs and then get delivered. ---
**Author:** ![MarkShanley](https://avatars.discourse-cdn.com/v4/letter/m/898d66/32.png) [@MarkShanley](https://community.inventables.com/u/MarkShanley)\ **Post date:** [October 29, 2015, 3:08pm UTC](https://community.inventables.com/t/contents-list-missing-items/15032/10 "2015-10-29T15:08:46Z")
Hi guys, Slightly off topic but how long did the process take from purchase to delivery for the x carve through robosavvy? About to make the purchase and looking to line up a week off work 😉 I’m based in Ireland so I’ll add a day or two to your turnaround. Much appreciated! ---
**Author:** ![RobertMatusiewicz](https://avatars.discourse-cdn.com/v4/letter/r/53a042/32.png) [@RobertMatusiewicz](https://community.inventables.com/u/RobertMatusiewicz)\ **Post date:** [October 29, 2015, 3:25pm UTC](https://community.inventables.com/t/contents-list-missing-items/15032/11 "2015-10-29T15:25:59Z")
Give Robosavvy a call and see if they have stock. I ordered an XC on a friday afternoon and it was delivered the following tuesday morning by courier. ---
**Author:** ![Tarry\_Brindle](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/tarry_brindle/32/32229_2.png) [@Tarry\_Brindle](https://community.inventables.com/u/Tarry_Brindle)\ **Post date:** [October 29, 2015, 4:03pm UTC](https://community.inventables.com/t/contents-list-missing-items/15032/12 "2015-10-29T16:03:34Z")
Wow, that’s a fast turnaround time! I was going crazy waiting over 3 weeks for mine to be shipped…but that’s nothing compared to those who were part of the initial order. ---
**Author:** ![DerekDouglas](https://avatars.discourse-cdn.com/v4/letter/d/5f8ce5/32.png) [@DerekDouglas](https://community.inventables.com/u/DerekDouglas)\ **Post date:** [October 29, 2015, 5:34pm UTC](https://community.inventables.com/t/contents-list-missing-items/15032/13 "2015-10-29T17:34:41Z")
Was just over 5 weeks for me, ordered it online, a week later they contacted me and said that the spindle had been replaced and had to pay extra for the 611, if I was to do it again I might look into ordering direct and paying the shipping and import tax, might work out cheaper as you would not order the spoil board as am sure you could probably source a mdf board cheaper. Don’t get me wrong I was not dissatisfied with robbosavvy, but they had none in stock so had to bring one across. But you also don’t get a choice with your build as they sell set systems.