# Console \[echo $G\]

**URL:** <https://community.inventables.com/t/console-echo-g/158378>\
**Category:** X-Carve Pro\
**Created:** [November 16, 2024, 3:10pm UTC](https://community.inventables.com/t/console-echo-g/158378 "2024-11-16T15:10:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![CapelCEnglish](https://avatars.discourse-cdn.com/v4/letter/c/3be4f8/32.png) [@CapelCEnglish](https://community.inventables.com/u/CapelCEnglish)\
**Post date:** [November 16, 2024, 3:10pm UTC](https://community.inventables.com/t/console-echo-g/158378/1 "2024-11-16T15:10:27Z")

</div>

On our makerspace X-Carve Pro, I’m using the gSender control software. Other members use Easel and some use Openbuilds Controller.

When I open the terminal window in gSender, I keep getting [echo $g] over and over and it scrolls the console window. How do I stop this so I can see my gcode commands without having to scroll up?

 ![20241112_145217](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/b/3/b30321740c905e7231d9bb58389de2300e9ae73a.jpeg)

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [February 14, 2025, 3:11pm UTC](https://community.inventables.com/t/console-echo-g/158378/2 "2025-02-14T15:11:21Z")

</div>

Closed on February 14, 2025, 3:11pm UTC

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.