# Complete Materials List

**URL:** <https://community.inventables.com/t/complete-materials-list/75014>\
**Category:** Assembly\
**Created:** [July 9, 2019, 11:38pm UTC](https://community.inventables.com/t/complete-materials-list/75014 "2019-07-09T23:38:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![AndrewHarris](https://avatars.discourse-cdn.com/v4/letter/a/b9bd4f/32.png) [@AndrewHarris](https://community.inventables.com/u/AndrewHarris)\
**Post date:** [July 9, 2019, 11:38pm UTC](https://community.inventables.com/t/complete-materials-list/75014/1 "2019-07-09T23:38:42Z")

</div>

Good evening y’all, I am looking at picking up a pre-owned partially assembled x-carve. Where can I find a complete list of materials that ships with a fully loaded 750 x-carve? Any clue? Thanks y’all, Drew

---

<div class="post-metadata">

**Author:** ![RobertNichols](https://avatars.discourse-cdn.com/v4/letter/r/e495f1/32.png) [@RobertNichols](https://community.inventables.com/u/RobertNichols)\
**Post date:** [July 9, 2019, 11:48pm UTC](https://community.inventables.com/t/complete-materials-list/75014/2 "2019-07-09T23:48:58Z")

</div>

Hey Drew

I ordered a fairly well loaded 750 mm X\_Carve in November of 2018. Following is a list of major components from Inventables confirmation email.

Product: X-Carve

> **[X-Carve](https://www.inventables.com/products/x-carve-1)**
>
> Inventables, Inc.

Contents:  
Easel  
X-Carve 750mm Rail Kit  
X-Carve  
X-Carve 110V DeWalt 611 Spindle and Mount  
X-Carve X-Controller Kit  
X-Carve NEMA 23 750mm Motor Kit  
X-Carve 750mm Waste Board Kit  
X-Carve 750mm Side Board Kit  
X-Carve 750mm Drag Chain Kit  
X-Carve 750mm Homing Switch Kit  
X-Carve Z-Probe  
X-Carve Dust Control System  
1/8" Precision Collet Kit for DeWalt 611  
X-Carve Clamp Set  
X-Carve End Mill Starter Set  
1/8” Bit Set for V-Carving  
¼" Bit Set for V-Carving  
Starter Material Bundle

If you are looking for a more complete Bill-of-Material, I would suggest reviewing the X-Carve assembly instructions.

> **[X-Carve Instructions: Welcome!](https://x-carve-instructions.inventables.com/750mm/)**
>
> X-Carve Instructions

Hope this is what you are looking for!!!

---

<div class="post-metadata">

**Author:** ![AndrewHarris](https://avatars.discourse-cdn.com/v4/letter/a/b9bd4f/32.png) [@AndrewHarris](https://community.inventables.com/u/AndrewHarris)\
**Post date:** [July 10, 2019, 8:46pm UTC](https://community.inventables.com/t/complete-materials-list/75014/3 "2019-07-10T20:46:32Z")

</div>

Thank you for the link! That helped out a lot. I copied and pasted it to an Excel document just incase anyone else needed it.

Thank you,

Drew

[X-Carve 750mm Parts List.xlsx](https://cdck-file-uploads-canada1.s3.dualstack.ca-central-1.amazonaws.com/flex009/uploads/inventables/original/3X/3/a/3aa5a91a80ea6f165cd7f325d9316ab55593f99f.xlsx) (14.4 KB)