# Changing zero position

**URL:** <https://community.inventables.com/t/changing-zero-position/85985>\
**Category:** Uncategorized\
**Created:** [February 14, 2020, 4:42pm UTC](https://community.inventables.com/t/changing-zero-position/85985 "2020-02-14T16:42:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ScottBourrell](https://avatars.discourse-cdn.com/v4/letter/s/ba9def/32.png) [@ScottBourrell](https://community.inventables.com/u/ScottBourrell)\
**Post date:** [February 14, 2020, 4:42pm UTC](https://community.inventables.com/t/changing-zero-position/85985/1 "2020-02-14T16:42:28Z")

</div>

Can someone give advice or information on how to change the zero position from the bottom left corner to the center.

---

<div class="post-metadata">

**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\
**Post date:** [February 14, 2020, 4:57pm UTC](https://community.inventables.com/t/changing-zero-position/85985/2 "2020-02-14T16:57:25Z")

</div>

Highlite what you want to carve. Click on shape in the upper right corner. Then in the little dice box in the upper left corner click on the center dot. Then to the right where it says position set both of those to 0 and it should move your project down and to the center.

---

<div class="post-metadata">

**Author:** ![HaldorLonningdal](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/haldorlonningdal/32/72377_2.png) [@HaldorLonningdal](https://community.inventables.com/u/HaldorLonningdal)\
**Post date:** [February 14, 2020, 5:35pm UTC](https://community.inventables.com/t/changing-zero-position/85985/3 "2020-02-14T17:35:34Z")

</div>

- Understand that WorkZero (Home Position) can be anywhere within the reach of the machine.
- In the design window in Easel, WorkZero will _ **always** _ be at grid axis X0Y0 point.
- If your design is centered around X0Y0 grid, like Wayne´s steps will give you, you confirm _Home Position_ at the center of your work piece.
- Only the upper right quadrant of Easel X/Y grid will show in preview, anything else wont preview - but will be carved nevertheless.

Happy carving! 🙂
