# Change of basic settings

**URL:** <https://community.inventables.com/t/change-of-basic-settings/150387>\
**Category:** Uncategorized\
**Created:** [January 3, 2024, 5:48pm UTC](https://community.inventables.com/t/change-of-basic-settings/150387 "2024-01-03T17:48:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![PaulAmos](https://avatars.discourse-cdn.com/v4/letter/p/838e76/32.png) [@PaulAmos](https://community.inventables.com/u/PaulAmos)\
**Post date:** [January 3, 2024, 5:48pm UTC](https://community.inventables.com/t/change-of-basic-settings/150387/1 "2024-01-03T17:48:42Z")

</div>

Would it be possible to change the following settings

 ![Screenshot 2024-01-03 173751](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/2/3/23b164f75a5359f0560f934c5fddb9109cac0deb.png)

On this dresser I would like to have a flush kicker so I can run a skirting (baseboard) around the bottom, the settings only has a minimum of 25mm inset.  
Can I delete the bottom panel to the top cabinet so the back and sides sit directly on the top.  
Is there away of creating a panel or worktop

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [April 2, 2024, 5:48pm UTC](https://community.inventables.com/t/change-of-basic-settings/150387/2 "2024-04-02T17:48:45Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.