# Carving letter **URL:** \ **Category:** Uncategorized\ **Created:** [June 1, 2017, 3:30pm UTC](https://community.inventables.com/t/carving-letter/38367 "2017-06-01T15:30:43Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![Oldhyppy69](https://avatars.discourse-cdn.com/v4/letter/o/bbce88/32.png) [@Oldhyppy69](https://community.inventables.com/u/Oldhyppy69)\ **Post date:** [June 1, 2017, 3:30pm UTC](https://community.inventables.com/t/carving-letter/38367/1 "2017-06-01T15:30:43Z")
Okay here’s what I’m trying to do . Set up an object to be cut out but inside of it I want a set of letter carved out. So I import my object get it sized then import the letters into it and shop them as fill set depth yet it does not cut the letters. Can somebody tall me what I’m doing wrong ---
**Author:** ![RobertBeattie](https://avatars.discourse-cdn.com/v4/letter/r/a587f6/32.png) [@RobertBeattie](https://community.inventables.com/u/RobertBeattie)\ **Post date:** [June 1, 2017, 3:34pm UTC](https://community.inventables.com/t/carving-letter/38367/2 "2017-06-01T15:34:02Z")
If you share your project, I’ll take a look. ---
**Author:** ![Oldhyppy69](https://avatars.discourse-cdn.com/v4/letter/o/bbce88/32.png) [@Oldhyppy69](https://community.inventables.com/u/Oldhyppy69)\ **Post date:** [June 1, 2017, 4:34pm UTC](https://community.inventables.com/t/carving-letter/38367/4 "2017-06-01T16:34:03Z")
ill share but not sure how ---
**Author:** ![RobertBeattie](https://avatars.discourse-cdn.com/v4/letter/r/a587f6/32.png) [@RobertBeattie](https://community.inventables.com/u/RobertBeattie)\ **Post date:** [June 1, 2017, 4:39pm UTC](https://community.inventables.com/t/carving-letter/38367/5 "2017-06-01T16:39:17Z")
File → Share ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/1/9/19f023a1b1018d77cb0505fc394e74a3075f5ff8.png) Share With Link ![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/a/1/a1ff74ab7815de30744513c26d99bc74d14c11fb.png) Copy link, hit save, paste the link here. ---
**Author:** ![Oldhyppy69](https://avatars.discourse-cdn.com/v4/letter/o/bbce88/32.png) [@Oldhyppy69](https://community.inventables.com/u/Oldhyppy69)\ **Post date:** [June 1, 2017, 7:37pm UTC](https://community.inventables.com/t/carving-letter/38367/6 "2017-06-01T19:37:32Z")
> **[Untitled](https://easel.inventables.com/projects/ZYUWmSpq5tM3jTw1kB2KNg)** > > by bernie wall ---
**Author:** ![Oldhyppy69](https://avatars.discourse-cdn.com/v4/letter/o/bbce88/32.png) [@Oldhyppy69](https://community.inventables.com/u/Oldhyppy69)\ **Post date:** [June 1, 2017, 10:37pm UTC](https://community.inventables.com/t/carving-letter/38367/8 "2017-06-01T22:37:23Z")
thank you have some 32 seconds coming have to wait till then thanks again man ---
**Author:** ![RobertBeattie](https://avatars.discourse-cdn.com/v4/letter/r/a587f6/32.png) [@RobertBeattie](https://community.inventables.com/u/RobertBeattie)\ **Post date:** [June 2, 2017, 12:29pm UTC](https://community.inventables.com/t/carving-letter/38367/9 "2017-06-02T12:29:25Z")
Alternately, you could try a different font, or turn it sideways and cut it a little larger. Not sure what the finished product is intended to be. Additionally, the 1/32" bit will take quite a while as you will be cutting a depth of .01" to .015" approximately per pass. ---
**Author:** ![RobertBeattie](https://avatars.discourse-cdn.com/v4/letter/r/a587f6/32.png) [@RobertBeattie](https://community.inventables.com/u/RobertBeattie)\ **Post date:** [June 2, 2017, 1:04pm UTC](https://community.inventables.com/t/carving-letter/38367/11 "2017-06-02T13:04:30Z")
The way that I am finding it, the ‘detail pass’ will also do all cut outs and profile passes unless I am missing something? On a larger project this could become substantial. ---
**Author:** ![Lenson](https://avatars.discourse-cdn.com/v4/letter/l/919ad9/32.png) [@Lenson](https://community.inventables.com/u/Lenson)\ **Post date:** [December 7, 2017, 10:44am UTC](https://community.inventables.com/t/carving-letter/38367/13 "2017-12-07T10:44:48Z")
I have question hope someone can help me, when i carved letter using vbit, why on the outside is not straight sorry my english is bad ![IMG_2](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/7/6/76764eb1c3bbbf9e2a85cd2ddd98daee8a40cd1d.jpg) ![IMG_1](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/9/5/954bec0723b50fb2607dc8430f7953d6c0b7cf84.jpg) ![IMG_3](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/3/d/3d5f7e6e1c73e4319afef036d24bdbd4daff625e.jpg) ---
**Author:** ![Lenson](https://avatars.discourse-cdn.com/v4/letter/l/919ad9/32.png) [@Lenson](https://community.inventables.com/u/Lenson)\ **Post date:** [December 7, 2017, 11:53am UTC](https://community.inventables.com/t/carving-letter/38367/15 "2017-12-07T11:53:11Z")
College… I try Time New Roman and Swiss721 also like that, if using vbit 120 degrees worse and when pocket letters are always like this ![IMG_02](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/8/8/884be00ff736b194a7cb2e2bf4ebdd13f0387557.jpg) ![IMG_01](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/1/c/1c414567d32b58711672aee0a776c2d1344adb34.jpg) ---
**Author:** ![Lenson](https://avatars.discourse-cdn.com/v4/letter/l/919ad9/32.png) [@Lenson](https://community.inventables.com/u/Lenson)\ **Post date:** [December 7, 2017, 6:01pm UTC](https://community.inventables.com/t/carving-letter/38367/16 "2017-12-07T18:01:13Z")
please someone help me… ---
**Author:** ![Lenson](https://avatars.discourse-cdn.com/v4/letter/l/919ad9/32.png) [@Lenson](https://community.inventables.com/u/Lenson)\ **Post date:** [December 8, 2017, 2:12pm UTC](https://community.inventables.com/t/carving-letter/38367/20 "2017-12-08T14:12:02Z")
this my vbit ![vbit](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/0/f/0f0d85dd75bf526d10a0e60bd566df5c8d145479.jpg) ---
**Author:** ![Lenson](https://avatars.discourse-cdn.com/v4/letter/l/919ad9/32.png) [@Lenson](https://community.inventables.com/u/Lenson)\ **Post date:** [December 8, 2017, 2:14pm UTC](https://community.inventables.com/t/carving-letter/38367/21 "2017-12-08T14:14:03Z")
MDF and Acrylic vectric aspire 12000 rpm feedrate 800mm/min ---
**Author:** ![JustinBusby](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/justinbusby/32/30906_2.png) [@JustinBusby](https://community.inventables.com/u/JustinBusby)\ **Post date:** [December 8, 2017, 2:24pm UTC](https://community.inventables.com/t/carving-letter/38367/22 "2017-12-08T14:24:04Z")
Looking at the tip from that angle in the picture, it looks flat tipped and not to a point, which would explain what Phil was saying. It does look like your machine has some mechanical issues too. Loose Z axis, Vwheels, or belts. As Robert suggested, do a complete mechanical check of it. ---
**Author:** ![Lenson](https://avatars.discourse-cdn.com/v4/letter/l/919ad9/32.png) [@Lenson](https://community.inventables.com/u/Lenson)\ **Post date:** [December 9, 2017, 6:07am UTC](https://community.inventables.com/t/carving-letter/38367/24 "2017-12-09T06:07:12Z")
---
**Author:** ![Lenson](https://avatars.discourse-cdn.com/v4/letter/l/919ad9/32.png) [@Lenson](https://community.inventables.com/u/Lenson)\ **Post date:** [December 9, 2017, 12:29pm UTC](https://community.inventables.com/t/carving-letter/38367/26 "2017-12-09T12:29:22Z")
i think machine no problem ![IMG_square](https://yyz1.discourse-cdn.com/flex009/images/transparent.png) ---
**Author:** ![Lenson](https://avatars.discourse-cdn.com/v4/letter/l/919ad9/32.png) [@Lenson](https://community.inventables.com/u/Lenson)\ **Post date:** [December 9, 2017, 2:59pm UTC](https://community.inventables.com/t/carving-letter/38367/29 "2017-12-09T14:59:58Z")
whether the belt should be very tight ???