# Carving a millennium falcon serving tray **URL:** \ **Category:** Uncategorized\ **Created:** [April 30, 2019, 3:30pm UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453 "2019-04-30T15:30:12Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![AnthonyHarvell](https://avatars.discourse-cdn.com/v4/letter/a/bbe5ce/32.png) [@AnthonyHarvell](https://community.inventables.com/u/AnthonyHarvell)\ **Post date:** [April 30, 2019, 3:30pm UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/1 "2019-04-30T15:30:12Z")
I was wondering if anyone would have plans for the milliennium falcon serving tray ---
**Author:** ![RussellCrawford](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RussellCrawford](https://community.inventables.com/u/RussellCrawford)\ **Post date:** [May 2, 2019, 12:25am UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/2 "2019-05-02T00:25:10Z")
Hi Anthony, I have never done the Millennium Falcon serving tray so I looked it up online and designed one. Good luck if you decide to make the tray, take and post pictures. Thanks Russell > **[Millennium Falcon Serving Tray](https://easel.inventables.com/projects/6WetPQd135TQVnojAG0maA)** > > by Russell Crawford ---
**Author:** ![DrewKasel](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/drewkasel/32/54741_2.png) [@DrewKasel](https://community.inventables.com/u/DrewKasel)\ **Post date:** [May 2, 2019, 3:02am UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/3 "2019-05-02T03:02:46Z")
Well. How cool is that? ---
**Author:** ![AnthonyHarvell](https://avatars.discourse-cdn.com/v4/letter/a/bbe5ce/32.png) [@AnthonyHarvell](https://community.inventables.com/u/AnthonyHarvell)\ **Post date:** [May 5, 2019, 6:29pm UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/4 "2019-05-05T18:29:43Z")
I’m going to buy the material and carve it out. I will send you pics when its all done. Thank you again for doing this ---
**Author:** ![RussellCrawford](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RussellCrawford](https://community.inventables.com/u/RussellCrawford)\ **Post date:** [May 6, 2019, 12:22pm UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/5 "2019-05-06T12:22:58Z")
You’re welcome. Good Luck!!! ---
**Author:** ![BlueLocktite](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/bluelocktite/32/68346_2.png) [@BlueLocktite](https://community.inventables.com/u/BlueLocktite)\ **Post date:** [May 6, 2019, 7:54pm UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/6 "2019-05-06T19:54:08Z")
Thanks for the share. Even though it will be a bit until I can carve that one I adjusted it for my bits… I don’t have any that will cut down 1.5" so I divided it up to cut in (2) 3/4" pieces. Should work out alright. ---
**Author:** ![RussellCrawford](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RussellCrawford](https://community.inventables.com/u/RussellCrawford)\ **Post date:** [May 8, 2019, 5:17pm UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/7 "2019-05-08T17:17:40Z")
You’re welcome, good luck and post pictures when complete. ---
**Author:** ![AprilPritchett](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/aprilpritchett/32/69239_2.png) [@AprilPritchett](https://community.inventables.com/u/AprilPritchett)\ **Post date:** [June 18, 2019, 1:04pm UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/8 "2019-06-18T13:04:10Z")
I thought this was a cool project so I carved one out of birch plywood that I had cut into 1.5 inch strips and glued up. Now, any suggestions of how to finish it? Thanks! ---
**Author:** ![Traxxtar](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/traxxtar/32/67235_2.png) [@Traxxtar](https://community.inventables.com/u/Traxxtar)\ **Post date:** [June 18, 2019, 1:07pm UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/9 "2019-06-18T13:07:10Z")
Let’s see it. ---
**Author:** ![AprilPritchett](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/aprilpritchett/32/69239_2.png) [@AprilPritchett](https://community.inventables.com/u/AprilPritchett)\ **Post date:** [June 18, 2019, 1:09pm UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/10 "2019-06-18T13:09:03Z")
![9EF9C635-6A9F-4C6A-BAB6-B09E00EA5CA1](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/e/8/e8c4e626996fe68ad050d1a3966ba2dbbeb654d7.jpeg) ---
**Author:** ![Traxxtar](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/traxxtar/32/67235_2.png) [@Traxxtar](https://community.inventables.com/u/Traxxtar)\ **Post date:** [June 18, 2019, 1:12pm UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/11 "2019-06-18T13:12:14Z")
I initially cringed when I read your post about using plywood, but this actually looks kinda cool. Nice job! ---
**Author:** ![WayneHall](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/waynehall/32/84646_2.png) [@WayneHall](https://community.inventables.com/u/WayneHall)\ **Post date:** [June 18, 2019, 1:18pm UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/12 "2019-06-18T13:18:03Z")
Looks great came out real good. ---
**Author:** ![AprilPritchett](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/aprilpritchett/32/69239_2.png) [@AprilPritchett](https://community.inventables.com/u/AprilPritchett)\ **Post date:** [June 18, 2019, 2:26pm UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/13 "2019-06-18T14:26:37Z")
Thanks! I’ve also made a guitar pick tray for my husband and it looks really good when stained. ![48D0A7F0-7079-439B-990C-98CAC8CE86EB](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/d/d/ddd80f42af02b3ba02e965ccf6d17cc2285298b1.jpeg) ---
**Author:** ![AprilPritchett](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/aprilpritchett/32/69239_2.png) [@AprilPritchett](https://community.inventables.com/u/AprilPritchett)\ **Post date:** [June 18, 2019, 2:27pm UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/14 "2019-06-18T14:27:19Z")
Thanks! ---
**Author:** ![RussellCrawford](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RussellCrawford](https://community.inventables.com/u/RussellCrawford)\ **Post date:** [June 19, 2019, 1:19am UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/15 "2019-06-19T01:19:43Z")
That came out good. ---
**Author:** ![DrewKasel](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/drewkasel/32/54741_2.png) [@DrewKasel](https://community.inventables.com/u/DrewKasel)\ **Post date:** [June 19, 2019, 3:16am UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/16 "2019-06-19T03:16:03Z")
Neat technique! ---
**Author:** ![AprilPritchett](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/aprilpritchett/32/69239_2.png) [@AprilPritchett](https://community.inventables.com/u/AprilPritchett)\ **Post date:** [June 19, 2019, 11:03am UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/17 "2019-06-19T11:03:26Z")
Thank you! ---
**Author:** ![AprilPritchett](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/aprilpritchett/32/69239_2.png) [@AprilPritchett](https://community.inventables.com/u/AprilPritchett)\ **Post date:** [June 19, 2019, 11:04am UTC](https://community.inventables.com/t/carving-a-millennium-falcon-serving-tray/72453/18 "2019-06-19T11:04:21Z")
Thank you.