# Carve stops mid-carve

**URL:** <https://community.inventables.com/t/carve-stops-mid-carve/68952>\
**Category:** X-Carve\
**Created:** [February 14, 2019, 7:44pm UTC](https://community.inventables.com/t/carve-stops-mid-carve/68952 "2019-02-14T19:44:21Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![DominikMai](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/dominikmai/32/72520_2.png) [@DominikMai](https://community.inventables.com/u/DominikMai)\
**Post date:** [February 15, 2019, 7:36am UTC](https://community.inventables.com/t/carve-stops-mid-carve/68952/4 "2019-02-15T07:36:32Z")

</div>

> [@AndyAnderson1](#):
>
> is issue thanks? I am frequently experiencing during a carving procedure a disconnection issue, and the machine will stop carving and wont commence again from where it left off. Would this be a controller problem, a laptop problem or a USB connection? Other times the BLUE carve tab will not turn to GREEN. The machine is a New Zealand built one, very good, with a controller similar to the X Carve.

Have a look [here](https://community.inventables.com/t/carving-keeps-stopping-resolved/55442/11), maybe it helps.

---

_[View the full topic](https://community.inventables.com/t/carve-stops-mid-carve/68952)._