# Cant use command \* ctrl-x

**URL:** <https://community.inventables.com/t/cant-use-command-ctrl-x/107380>\
**Category:** Troubleshooting\
**Created:** [December 17, 2020, 2:03am UTC](https://community.inventables.com/t/cant-use-command-ctrl-x/107380 "2020-12-17T02:03:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![DanielJauregui](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/danieljauregui/32/86993_2.png) [@DanielJauregui](https://community.inventables.com/u/DanielJauregui)\
**Post date:** [December 17, 2020, 2:03am UTC](https://community.inventables.com/t/cant-use-command-ctrl-x/107380/1 "2020-12-17T02:03:49Z")

</div>

Im using X- Controller GBRL 1.1g Cant use command

- ctrl-x
- error:9
- ctrl-x / ^X
- error:9

Ive used it before but not sure how, any-ideas, also if there is a compiled list of commands exclusively for x-carve 1000 will be appreciated .  
I want to move out from Easel.

Thanks

---

<div class="post-metadata">

**Author:** ![Brandon\_Cullum](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/brandon_cullum/32/85007_2.png) [@Brandon\_Cullum](https://community.inventables.com/u/Brandon_Cullum)\
**Post date:** [December 17, 2020, 11:02am UTC](https://community.inventables.com/t/cant-use-command-ctrl-x/107380/2 "2020-12-17T11:02:00Z")

</div>

This is our write up on gcode, but it might not be exactly what you are looking for: [https://inventables.zendesk.com/hc/en-us/articles/360012642474-Easel-G-code-Spec](https://inventables.zendesk.com/hc/en-us/articles/360012642474-Easel-G-code-Spec)