# Cannot move the machine while the door is open

**URL:** <https://community.inventables.com/t/cannot-move-the-machine-while-the-door-is-open/76546>\
**Category:** X-Carve\
**Created:** [August 21, 2019, 2:02am UTC](https://community.inventables.com/t/cannot-move-the-machine-while-the-door-is-open/76546 "2019-08-21T02:02:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![RyanGuedel](https://avatars.discourse-cdn.com/v4/letter/r/b4bc9f/32.png) [@RyanGuedel](https://community.inventables.com/u/RyanGuedel)\
**Post date:** [August 21, 2019, 2:02am UTC](https://community.inventables.com/t/cannot-move-the-machine-while-the-door-is-open/76546/1 "2019-08-21T02:02:10Z")

</div>

I had to reload the easel driver and now I get this screwy message “Cannot move the machine while the door is open” when I try to home the machine. There is no door. Can anyone help me get this resolved? Thanks

---

<div class="post-metadata">

**Author:** ![HaldorLonningdal](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/haldorlonningdal/32/72377_2.png) [@HaldorLonningdal](https://community.inventables.com/u/HaldorLonningdal)\
**Post date:** [August 21, 2019, 6:33am UTC](https://community.inventables.com/t/cannot-move-the-machine-while-the-door-is-open/76546/2 "2019-08-21T06:33:48Z")

</div>

> [@RyanGuedel](#):
>
> “Cannot move the machine while the door is open” when I try to home the machine. There is no door.

The Carvey have a safety switch on the door as its a closed machine - have you set yours up as a Carvey instead of Xcarve?

---

<div class="post-metadata">

**Author:** ![RyanGuedel](https://avatars.discourse-cdn.com/v4/letter/r/b4bc9f/32.png) [@RyanGuedel](https://community.inventables.com/u/RyanGuedel)\
**Post date:** [August 21, 2019, 7:17pm UTC](https://community.inventables.com/t/cannot-move-the-machine-while-the-door-is-open/76546/3 "2019-08-21T19:17:33Z")

</div>

No I have it set as an X Carve but I will try to set up again just in case. Thanks