# C4N z axis with jtech laser. what are my dust boot options?

**URL:** <https://community.inventables.com/t/c4n-z-axis-with-jtech-laser-what-are-my-dust-boot-options/129228>\
**Category:** Upgrades\
**Created:** [February 10, 2022, 12:24am UTC](https://community.inventables.com/t/c4n-z-axis-with-jtech-laser-what-are-my-dust-boot-options/129228 "2022-02-10T00:24:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SunirGohil](https://avatars.discourse-cdn.com/v4/letter/s/2acd7d/32.png) [@SunirGohil](https://community.inventables.com/u/SunirGohil)\
**Post date:** [February 10, 2022, 12:24am UTC](https://community.inventables.com/t/c4n-z-axis-with-jtech-laser-what-are-my-dust-boot-options/129228/1 "2022-02-10T00:24:39Z")

</div>

Hi, I have the C4N z axis upgrade and have a jtech laser mounted. Can i install the x-carve dust system from inventables? if not are my options either the pwncnc v5 dust boot? I would like to get something that can be taken on and off easily.

---

<div class="post-metadata">

**Author:** ![DanielMoran](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/danielmoran/32/79268_2.png) [@DanielMoran](https://community.inventables.com/u/DanielMoran)\
**Post date:** [March 2, 2022, 3:10pm UTC](https://community.inventables.com/t/c4n-z-axis-with-jtech-laser-what-are-my-dust-boot-options/129228/2 "2022-03-02T15:10:39Z")

</div>

If you want to use the laser without removing the boot… look at v2 or v3 designs. Catch is you’ll have to have raised your X gantry to make it fit.  
Raising as in the inventables upgrade kit for standard X-Carves.