# Bump Stop/Corner Bracket Template **URL:** \ **Category:** X-Carve Pro\ **Created:** [July 8, 2021, 4:54pm UTC](https://community.inventables.com/t/bump-stop-corner-bracket-template/119944 "2021-07-08T16:54:36Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Brandon\_Cullum](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/brandon_cullum/32/85007_2.png) [@Brandon\_Cullum](https://community.inventables.com/u/Brandon_Cullum)\ **Post date:** [July 8, 2021, 4:54pm UTC](https://community.inventables.com/t/bump-stop-corner-bracket-template/119944/1 "2021-07-08T16:54:36Z")
Hey guys, I just cut out a quick bump stop guide that could be combined together to make a corner piece as well. [Here is the Easel link if you want to check it out.](https://easel.inventables.com/projects/8oip6NT_DGarp1jwyfpG4Q) And if you didn’t know the distance between holes on the wasteboard on the X axis is slightly larger than the y: X-Axis Hole Distance = 72.5 mm Y-Axis Hole Distance = 70.8 mm ---
**Author:** ![TimothyWood1](https://avatars.discourse-cdn.com/v4/letter/t/ac8455/32.png) [@TimothyWood1](https://community.inventables.com/u/TimothyWood1)\ **Post date:** [September 21, 2021, 7:49pm UTC](https://community.inventables.com/t/bump-stop-corner-bracket-template/119944/2 "2021-09-21T19:49:16Z")
Hi Brandon, just wanted to confirm with you - are the hole distances you provided from the center of each hole or edge-to-edge? Many thanks, Tim ---
**Author:** ![NeilFerreri1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/neilferreri1/32/84403_2.png) [@NeilFerreri1](https://community.inventables.com/u/NeilFerreri1)\ **Post date:** [September 21, 2021, 11:33pm UTC](https://community.inventables.com/t/bump-stop-corner-bracket-template/119944/3 "2021-09-21T23:33:21Z")
@TimothyWood1 Those are measured on center. ---
**Author:** ![TimothyWood1](https://avatars.discourse-cdn.com/v4/letter/t/ac8455/32.png) [@TimothyWood1](https://community.inventables.com/u/TimothyWood1)\ **Post date:** [September 22, 2021, 1:00am UTC](https://community.inventables.com/t/bump-stop-corner-bracket-template/119944/4 "2021-09-22T01:00:40Z")
Thanks v. much, Neil. Feel free to use the rulers attached. Should work on any laser including GlowForge, and sets up nicely on the X-Carve Pro. Once fixed in place on your wasteboard just dial in your X-Y start position, and reuse it each time. ![X-Carve Pro Bump Stop Imperial Decimal Ruler 10-8x20](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/2/4/24bf33c9475c2fd7236aa09e9c14ec8c54f01dcb.svg) ![X-Carve Pro Bump Stop Imperial Fractional Ruler 10x18 MADE FOR GLOWFORGE](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/7/c/7c39f8c31a3e34079e19446b102f04898f43100a.svg) ---
**Author:** ![BManCan](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/bmancan/32/69097_2.png) [@BManCan](https://community.inventables.com/u/BManCan)\ **Post date:** [September 22, 2021, 1:10am UTC](https://community.inventables.com/t/bump-stop-corner-bracket-template/119944/5 "2021-09-22T01:10:57Z")
According to the Inventables wasteboard drawings, the X and Y hole spacing is 75mm. > **[A Fond Farewell to GrabCAD Workbench - GrabCAD Blog](https://blog.grabcad.com/blog/2022/08/09/a-fond-farewell-to-grabcad-workbench/)** > > GrabCAD Workbench laid the foundations of what GrabCAD is today and on June 1st, 2023, GrabCAD Workbench services will be discontinued. My mistake, just realized this was the XCP forum 😊 ---
**Author:** ![TimothyWood1](https://avatars.discourse-cdn.com/v4/letter/t/ac8455/32.png) [@TimothyWood1](https://community.inventables.com/u/TimothyWood1)\ **Post date:** [September 22, 2021, 1:12am UTC](https://community.inventables.com/t/bump-stop-corner-bracket-template/119944/6 "2021-09-22T01:12:48Z")
75mm for the 1000mm XCarve - the Pro has the weird spacings.