# Borders not coming out proper size

**URL:** <https://community.inventables.com/t/borders-not-coming-out-proper-size/104260>\
**Category:** Uncategorized\
**Created:** [November 14, 2020, 4:22pm UTC](https://community.inventables.com/t/borders-not-coming-out-proper-size/104260 "2020-11-14T16:22:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![RayDavis](https://avatars.discourse-cdn.com/v4/letter/r/c89c15/32.png) [@RayDavis](https://community.inventables.com/u/RayDavis)\
**Post date:** [November 14, 2020, 4:22pm UTC](https://community.inventables.com/t/borders-not-coming-out-proper-size/104260/1 "2020-11-14T16:22:33Z")

</div>

why are my borders different sizes do i have something set wrong

 ![IMG_241755](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/3/8/384366870975d9cec792dab1ec999e3186356721.jpeg) ![IMG_241954](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/3/8/38fd405f18ded42b4b79e0f5f25a768fb7e65b98.jpeg)

---

<div class="post-metadata">

**Author:** ![RussellCrawford](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RussellCrawford](https://community.inventables.com/u/RussellCrawford)\
**Post date:** [November 14, 2020, 8:14pm UTC](https://community.inventables.com/t/borders-not-coming-out-proper-size/104260/2 "2020-11-14T20:14:49Z")

</div>

Don’t know your settings but you have the material size as 6" X 16". What is the size of the wood that you’re using? If your material is 6" X 16" and you set home to the bottom left corner then it will come out correct.  
Russell

---

<div class="post-metadata">

**Author:** ![NeilFerreri1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/neilferreri1/32/84403_2.png) [@NeilFerreri1](https://community.inventables.com/u/NeilFerreri1)\
**Post date:** [November 15, 2020, 4:12am UTC](https://community.inventables.com/t/borders-not-coming-out-proper-size/104260/3 "2020-11-15T04:12:23Z")

</div>

In addition to what @RussellCrawford said, make sure that you set zero when the center of your endmill is ON the corner, not inside it.

 ![image](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/4/2/42cb2ddc2a67b5df3ebb4316d9f44ffdce86b7d6.png) ![image](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/8/5/8510bd6c4a8db128b4c1e7d0aa0feb9d68a45dfa.png)