# Assembly instructions without upgraded wasteboard kit?

**URL:** <https://community.inventables.com/t/assembly-instructions-without-upgraded-wasteboard-kit/133763>\
**Category:** Assembly\
**Created:** [July 24, 2022, 10:11pm UTC](https://community.inventables.com/t/assembly-instructions-without-upgraded-wasteboard-kit/133763 "2022-07-24T22:11:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JohnPittorf](https://avatars.discourse-cdn.com/v4/letter/j/8c91f0/32.png) [@JohnPittorf](https://community.inventables.com/u/JohnPittorf)\
**Post date:** [July 24, 2022, 10:11pm UTC](https://community.inventables.com/t/assembly-instructions-without-upgraded-wasteboard-kit/133763/1 "2022-07-24T22:11:05Z")

</div>

Are there assembly instructions somewhere when assembling the base of the cnc? The instructions are with the upgraded wasteboard which I opted out and made my own but do not see how to setup the base properly.

---

<div class="post-metadata">

**Author:** ![Ken4](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/ken4/32/87117_2.png) [@Ken4](https://community.inventables.com/u/Ken4)\
**Post date:** [July 24, 2022, 10:50pm UTC](https://community.inventables.com/t/assembly-instructions-without-upgraded-wasteboard-kit/133763/2 "2022-07-24T22:50:03Z")

</div>

hope this helps??

[X-Carve Instructions: Welcome! (inventables.com)](https://x-carve-instructions.inventables.com/1000mm/)

---

<div class="post-metadata">

**Author:** ![JohnPittorf](https://avatars.discourse-cdn.com/v4/letter/j/8c91f0/32.png) [@JohnPittorf](https://community.inventables.com/u/JohnPittorf)\
**Post date:** [July 25, 2022, 1:05am UTC](https://community.inventables.com/t/assembly-instructions-without-upgraded-wasteboard-kit/133763/3 "2022-07-25T01:05:45Z")

</div>

Oh yeah, as long as it’s the same parts and board dimensions then that’s perfect, thanks!