# Assembled footprint of the 1000x1000 XCarve

**URL:** <https://community.inventables.com/t/assembled-footprint-of-the-1000x1000-xcarve/21377>\
**Category:** Assembly\
**Created:** [March 17, 2016, 5:28am UTC](https://community.inventables.com/t/assembled-footprint-of-the-1000x1000-xcarve/21377 "2016-03-17T05:28:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![GlennCoates](https://avatars.discourse-cdn.com/v4/letter/g/cc9497/32.png) [@GlennCoates](https://community.inventables.com/u/GlennCoates)\
**Post date:** [March 17, 2016, 5:28am UTC](https://community.inventables.com/t/assembled-footprint-of-the-1000x1000-xcarve/21377/1 "2016-03-17T05:28:54Z")

</div>

I have purchased all the parts to upgrade my XCarve to 1000X1000mm but before I can assemble it I need to build a table big enough to hold it.

I want’ to build a table large enough so that I can eventually also build an enclosure for the machine.

I can’t find anything that shows the assembled footprint size of the machine. Can someone help me out with this.

Thanks for your help.

---

<div class="post-metadata">

**Author:** ![GeoffSteer](https://avatars.discourse-cdn.com/v4/letter/g/7c8e57/32.png) [@GeoffSteer](https://community.inventables.com/u/GeoffSteer)\
**Post date:** [March 17, 2016, 6:48am UTC](https://community.inventables.com/t/assembled-footprint-of-the-1000x1000-xcarve/21377/2 "2016-03-17T06:48:58Z")

</div>

> [@Looking for overall size specification/footprint of X-Carve?](https://community.inventables.com/t/looking-for-overall-size-specification-footprint-of-x-carve/663/1):
>
> Hi all. I’m building a work bench for the X-Carve and looking for the full overall dimensions of the unit and any outlying operational items like belts, etc that will need freedom to move. One side of the bench will be up against a wall. Also how deep and wide would you suggest building the bench?

---

<div class="post-metadata">

**Author:** ![MarcCohen](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/marccohen/32/16524_2.png) [@MarcCohen](https://community.inventables.com/u/MarcCohen)\
**Post date:** [March 17, 2016, 10:21am UTC](https://community.inventables.com/t/assembled-footprint-of-the-1000x1000-xcarve/21377/3 "2016-03-17T10:21:55Z")

</div>

Since the machine is listed as a 1000 x 1000 mm machine, making a table that is 4 feet x 4 feet should be sufficient. I am currently in the process of making a 4 feet x 6 feet work table, which you can follow on another thread in this forum (Workspace Showcase).