# Aspire 10.507 gcode error

**URL:** <https://community.inventables.com/t/aspire-10-507-gcode-error/99920>\
**Category:** X-Carve\
**Created:** [September 16, 2020, 10:49am UTC](https://community.inventables.com/t/aspire-10-507-gcode-error/99920 "2020-09-16T10:49:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![CraigMBaltzer](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/craigmbaltzer/32/74222_2.png) [@CraigMBaltzer](https://community.inventables.com/u/CraigMBaltzer)\
**Post date:** [September 16, 2020, 10:49am UTC](https://community.inventables.com/t/aspire-10-507-gcode-error/99920/1 "2020-09-16T10:49:18Z")

</div>

Last night I updated my aspire software to version 10.507. Typically I don’t ever have to touch the export settings but noticed this time they we’re a little different. When I got things the way I wanted them and saved the GCode i opened the file in easel only to get the following GCode error…  
Line 76: G2X0.1300Y45.4425I0.0625J0.0000  
The file contains invalid G-code syntax  
I reprogrammed the part in the older version software and everything went smooth. is there a known issue with the V10.507 Aspire software or is there new setting I am missing?

---

<div class="post-metadata">

**Author:** ![NeilFerreri1](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/neilferreri1/32/84403_2.png) [@NeilFerreri1](https://community.inventables.com/u/NeilFerreri1)\
**Post date:** [September 16, 2020, 10:53pm UTC](https://community.inventables.com/t/aspire-10-507-gcode-error/99920/2 "2020-09-16T22:53:09Z")

</div>

> [@CraigMBaltzer](#):
>
> is there a known issue with the V10.507 Aspire

They messed up the post processors, but I would’ve assumed they’re fixed by now.  
A few things that’ll help:

1. Use a metric post processor. The arc calculations aren’t precise enough for GRBL’s checks.
2. Don’t use Easel. It doesn’t like arcs.
3. Use a different post processor.
