# Another one alive

**URL:** <https://community.inventables.com/t/another-one-alive/35233>\
**Category:** X-Carve\
**Created:** [March 13, 2017, 6:22pm UTC](https://community.inventables.com/t/another-one-alive/35233 "2017-03-13T18:22:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![IanTinkler](https://avatars.discourse-cdn.com/v4/letter/i/47e85d/32.png) [@IanTinkler](https://community.inventables.com/u/IanTinkler)\
**Post date:** [March 13, 2017, 6:22pm UTC](https://community.inventables.com/t/another-one-alive/35233/1 "2017-03-13T18:22:55Z")

</div>

![](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/5/a/5abbac207f06bdb3dde58a0d5624f7b25aab9cf6.JPG)

So after waiting for my x controller to arrive it finally came today, sadly no backplate but still runs ok and seems to be set up ok.! Carved using F engrave and UGS

---

<div class="post-metadata">

**Author:** ![IanTinkler](https://avatars.discourse-cdn.com/v4/letter/i/47e85d/32.png) [@IanTinkler](https://community.inventables.com/u/IanTinkler)\
**Post date:** [March 13, 2017, 7:17pm UTC](https://community.inventables.com/t/another-one-alive/35233/3 "2017-03-13T19:17:45Z")

</div>

Cheers Phill, I wont show the one where I forgot to reset zeros and scared the life out of myself when the machine tried to launch itself off the rail, dust extraction is next on the list.

---

<div class="post-metadata">

**Author:** ![IanTinkler](https://avatars.discourse-cdn.com/v4/letter/i/47e85d/32.png) [@IanTinkler](https://community.inventables.com/u/IanTinkler)\
**Post date:** [March 14, 2017, 8:52pm UTC](https://community.inventables.com/t/another-one-alive/35233/5 "2017-03-14T20:52:49Z")

</div>

Phil you cursed me lol, just had a 1/2 v bit bury itself in the waste board, note to self RESET ZEROS!