# Angus's linuX-Carve

**URL:** <https://community.inventables.com/t/anguss-linux-carve/14177>\
**Category:** Assembly\
**Created:** [October 8, 2015, 9:07pm UTC](https://community.inventables.com/t/anguss-linux-carve/14177 "2015-10-08T21:07:49Z")\
**Posts on this page:** 1\
**Showing post:** 322

<div class="post-metadata">

**Author:** ![ErikJenkins](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/erikjenkins/32/84368_2.png) [@ErikJenkins](https://community.inventables.com/u/ErikJenkins)\
**Post date:** [April 24, 2016, 11:32pm UTC](https://community.inventables.com/t/anguss-linux-carve/14177/322 "2016-04-24T23:32:27Z")

</div>

This?

> [@3D printed router template for cutting wasteboard edge slots (and a bit tip)](https://community.inventables.com/t/3d-printed-router-template-for-cutting-wasteboard-edge-slots-and-a-bit-tip/17522):
>
> [I just uploaded a model to Thingiverse](http://www.thingiverse.com/thing:1212218) that makes it easy to route the wasteboard edge slots using a handheld router with a 3/4" OD guide bushing. It’s also got alignment marks. Since I didn’t have metric router bits I discovered that 2 of the bits from my Freud Undersized Plywood Set (7/32 and 15/32) should be close enough. I don’t know how many other people are coming from 3D printing to CNC, but there’s at least one of us.

---

_[View the full topic](https://community.inventables.com/t/anguss-linux-carve/14177)._
