# Altering an X-carve - questions

**URL:** <https://community.inventables.com/t/altering-an-x-carve-questions/119051>\
**Category:** Uncategorized\
**Created:** [June 12, 2021, 10:38pm UTC](https://community.inventables.com/t/altering-an-x-carve-questions/119051 "2021-06-12T22:38:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![KreigMcbride](https://avatars.discourse-cdn.com/v4/letter/k/6f9a4e/32.png) [@KreigMcbride](https://community.inventables.com/u/KreigMcbride)\
**Post date:** [June 12, 2021, 10:38pm UTC](https://community.inventables.com/t/altering-an-x-carve-questions/119051/1 "2021-06-12T22:38:01Z")

</div>

Looking at purchasing a used 750mm X-carve and have several questions.

Having used a similar machine, am familiar with Easel design and operation. However my needs require a larger machine. Here are my questions:

1. Can I purchase longer railings for the Y axis? I am thinking 5 to 6 feet. Assuming the railing would need a support in the center area to prevent sagging. Where to purchase this item and has anyone modified an x-carve in this way?

2. Also, would like to add 2 inches to the Z axis. Looks like a simple modification duplicating the existing support brackets with added height. Almost all my materials are 1.5 inches and thicker.

3. In regards to making a new waste board to accommodate the extended T axis, any suggestions on making this item?

Thank you.

---

<div class="post-metadata">

**Author:** ![MartinW.Mcclary](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/martinw.mcclary/32/63385_2.png) [@MartinW.Mcclary](https://community.inventables.com/u/MartinW.Mcclary)\
**Post date:** [June 13, 2021, 1:30am UTC](https://community.inventables.com/t/altering-an-x-carve-questions/119051/2 "2021-06-13T01:30:50Z")

</div>

I have what was an upgraded shapeoko2 to x carve that is 750 x 1000.

Inventables used to sell longer makerslide, but they haven’t for years. Openbuilds sells extrusion and bolt on vee rail called openrail and that might do the trick.

[OpenRail® Linear Rail - OpenBuilds Part Store](https://openbuildspartstore.com/openrail-linear-rail/)

Some here have tried butting up two pieces of makerslide, but haven’t reported back. Most people would reset the material and do a two step operation.

There are aftermarket risers, stiffeners, z axes, and 9mm belts and pulleys. They used to be sold by [CNC4newbies.com](http://CNC4newbies.com) and [FAQ — tbd cnc, LLC](https://www.tbdcnc.com/faq) TBD is now part of the Inventables family I believe. I bought all the upgrades and they are worth it.

[X-Carve Upgrades | Inventables](https://www.inventables.com/categories/machine-upgrades/x-carve-upgrades)

For a wasteboard, I used plywood with 1/4-20 threaded inserts but they were too far apart and made clamping a pain. I ended up installing extra extrusion and using Tslot from Woodcraft. I posted it here a couple of weeks ago. I put basswood in between the t slot as it is a stable wood.

Here is a link

[T slot bed for the X- carve - Inventables Community Forum](https://community.inventables.com/t/t-slot-bed-for-the-x-carve/117492)
