# A few projects that I have made

**URL:** <https://community.inventables.com/t/a-few-projects-that-i-have-made/66552>\
**Category:** Projects\
**Created:** [January 3, 2019, 12:52am UTC](https://community.inventables.com/t/a-few-projects-that-i-have-made/66552 "2019-01-03T00:52:07Z")\
**Posts on this page:** 1\
**Showing post:** 32

<div class="post-metadata">

**Author:** ![RussellCrawford](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@RussellCrawford](https://community.inventables.com/u/RussellCrawford)\
**Post date:** [September 3, 2019, 2:55am UTC](https://community.inventables.com/t/a-few-projects-that-i-have-made/66552/32 "2019-09-03T02:55:34Z")

</div>

Some signs I made using plywood, Oracal 810 masking, shellac and rustoleum spray paint.  
I sanded the board and applied shellac  
Sanded and sprayed a coat of paint  
Sanded and sprayed 2nd coat  
Let dry and applied vinyl masking  
Engrave  
Apply shellac to engraved wood  
Spray paint  
Remove mask  
I have used the oramask 810 a few times and it has worked good. I used a 90 degree Diablo bit from HD

 ![241542B2-4F09-40C5-A8B3-87845064FD8F](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/c/8/c8c68387515d1cb8be16725a195db74efd837461.jpeg) ![0A8B65DB-C907-4F4A-99D0-8A66188930B2](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/0/a/0a07d886fc457785c95ad3fcfc07e5b36b22040d.jpeg) ![977A3F33-72D3-41A4-ABD4-9AFC381BED21](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/e/6/e6793835ae1e74c379266061286b0d9e1bc66272.jpeg) ![53BD4D87-E04B-46FE-B1C1-68A6B038DE20](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/4/1/41d638e03e391e9ea6e1a537972a67d0721d3adb.jpeg) ![D1F7776A-D8DE-4BE8-B2FE-F233C568684F](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/2/6/267d9831b4afa9f777154ec3598d14a08b2a6216.jpeg)

---

_[View the full topic](https://community.inventables.com/t/a-few-projects-that-i-have-made/66552)._