# $900 - 1000mm xcarve with suckit dust boot and jtech laser - Georgia **URL:** \ **Category:** For Sale and Trade\ **Created:** [June 11, 2018, 12:28pm UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603 "2018-06-11T12:28:21Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![JonathanBrown](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@JonathanBrown](https://community.inventables.com/u/JonathanBrown)\ **Post date:** [June 11, 2018, 12:28pm UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/1 "2018-06-11T12:28:21Z")
I am looking to sale my 1000mm with jtech laser and suckit dust boot for sale. it is in perfect working order. DOES NOT INCLUDE ROUTER. I will also include the switch that will turn the router on and off with carving. Pickup only in Macon Georgia ---
**Author:** ![JonathanBrown](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@JonathanBrown](https://community.inventables.com/u/JonathanBrown)\ **Post date:** [June 11, 2018, 11:41pm UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/4 "2018-06-11T23:41:17Z")
Sale pending. Will keep you posted if it falls through ---
**Author:** ![DonaldBloomingdale](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/donaldbloomingdale/32/56177_2.png) [@DonaldBloomingdale](https://community.inventables.com/u/DonaldBloomingdale)\ **Post date:** [June 13, 2018, 11:45am UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/5 "2018-06-13T11:45:12Z")
have you sold this yet ? ---
**Author:** ![JonathanBrown](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@JonathanBrown](https://community.inventables.com/u/JonathanBrown)\ **Post date:** [June 15, 2018, 5:02pm UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/6 "2018-06-15T17:02:14Z")
Sorry for the delay, this week has been crazy. The sale did not go through… the guy never showed up, but I also ran into an issue afterwards. My wife got super pissed when I told her I was selling it because she bought it for me as a gift and she reminded me that new it was $1200 dollars not including the laser and the router controller. she is not going to let me sell it for less than $1000. ---
**Author:** ![JonathanBrown](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@JonathanBrown](https://community.inventables.com/u/JonathanBrown)\ **Post date:** [June 16, 2018, 12:28am UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/8 "2018-06-16T00:28:23Z")
Still available $900 ---
**Author:** ![LeonardFowler](https://avatars.discourse-cdn.com/v4/letter/l/2bfe46/32.png) [@LeonardFowler](https://community.inventables.com/u/LeonardFowler)\ **Post date:** [June 17, 2018, 4:08am UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/9 "2018-06-17T04:08:41Z")
Is this unit still available? I am considering in purchasing an Xcarve unit. Saw your post and I live about an hour and a half north of Macon (Walton County).What else would I need in order to operate the Xcarve machine? I have a Bosch Colt router. ---
**Author:** ![JonathanBrown](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@JonathanBrown](https://community.inventables.com/u/JonathanBrown)\ **Post date:** [June 17, 2018, 1:09pm UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/10 "2018-06-17T13:09:50Z")
Yes it is still available. I think all you would need is [https://www.inventables.com/technologies/bosch-colt-pr20evs-spindle-mount](https://www.inventables.com/technologies/bosch-colt-pr20evs-spindle-mount). Everything else is included. Let me know. ---
**Author:** ![LeonardFowler](https://avatars.discourse-cdn.com/v4/letter/l/2bfe46/32.png) [@LeonardFowler](https://community.inventables.com/u/LeonardFowler)\ **Post date:** [June 19, 2018, 12:20am UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/11 "2018-06-19T00:20:54Z")
Great! Thanks for information on the adapter. So, where and when do you want to meet to exchange. I usually come down through Montecello and Gray to go to Macon. I don’t like traveling on the interstate. Takes me about 2 hours going the back way through the country. ---
**Author:** ![GregBuckwalter](https://avatars.discourse-cdn.com/v4/letter/g/f05b48/32.png) [@GregBuckwalter](https://community.inventables.com/u/GregBuckwalter)\ **Post date:** [June 19, 2018, 12:29am UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/12 "2018-06-19T00:29:51Z")
@JonathanBrown if the current lead doesn’t work out - are you willing to sell the JTech laser seperate? ---
**Author:** ![JonathanBrown](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@JonathanBrown](https://community.inventables.com/u/JonathanBrown)\ **Post date:** [June 19, 2018, 5:54pm UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/13 "2018-06-19T17:54:49Z")
no, I would not be interested in selling it separate… sorry ---
**Author:** ![JonathanBrown](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@JonathanBrown](https://community.inventables.com/u/JonathanBrown)\ **Post date:** [June 19, 2018, 5:55pm UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/14 "2018-06-19T17:55:21Z")
pm sent ---
**Author:** ![LisaCooper](https://avatars.discourse-cdn.com/v4/letter/l/a4c791/32.png) [@LisaCooper](https://community.inventables.com/u/LisaCooper)\ **Post date:** [June 21, 2018, 3:03am UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/15 "2018-06-21T03:03:42Z")
Did you sell this yet? ---
**Author:** ![JonathanBrown](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@JonathanBrown](https://community.inventables.com/u/JonathanBrown)\ **Post date:** [June 21, 2018, 2:29pm UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/16 "2018-06-21T14:29:30Z")
it is in process. someone is currently set up to come get it on Saturday, I will update if it doesn’t pan out. ---
**Author:** ![RobertWesson](https://avatars.discourse-cdn.com/v4/letter/r/cab0a1/32.png) [@RobertWesson](https://community.inventables.com/u/RobertWesson)\ **Post date:** [July 1, 2018, 1:01am UTC](https://community.inventables.com/t/900-1000mm-xcarve-with-suckit-dust-boot-and-jtech-laser-georgia/56603/17 "2018-07-01T01:01:18Z")
Have you sold it yet?