# 3d carving a free grabcad step file with Fusion 360

**URL:** <https://community.inventables.com/t/3d-carving-a-free-grabcad-step-file-with-fusion-360/26847>\
**Category:** Projects\
**Created:** [August 15, 2016, 12:41am UTC](https://community.inventables.com/t/3d-carving-a-free-grabcad-step-file-with-fusion-360/26847 "2016-08-15T00:41:27Z")\
**Posts on this page:** 6\
**Page:** 0

<div class="post-metadata">

**Author:** ![cncrockstar](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/cncrockstar/32/82500_2.png) [@cncrockstar](https://community.inventables.com/u/cncrockstar)\
**Post date:** [August 15, 2016, 3:15am UTC](https://community.inventables.com/t/3d-carving-a-free-grabcad-step-file-with-fusion-360/26847/3 "2016-08-15T03:15:07Z")

</div>

Stupid question, but you can do both sides, right?  
That looks awesome so far!  
Also, did you use Easel to send all the code?

---

<div class="post-metadata">

**Author:** ![cncrockstar](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/cncrockstar/32/82500_2.png) [@cncrockstar](https://community.inventables.com/u/cncrockstar)\
**Post date:** [August 15, 2016, 4:31am UTC](https://community.inventables.com/t/3d-carving-a-free-grabcad-step-file-with-fusion-360/26847/5 "2016-08-15T04:31:12Z")

</div>

How do you use a probe using UGS? That’s what I use now and would love to be able to probe surfaces.

---

<div class="post-metadata">

**Author:** ![RaphaelPascual](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/raphaelpascual/32/67523_2.png) [@RaphaelPascual](https://community.inventables.com/u/RaphaelPascual)\
**Post date:** [August 15, 2016, 2:00pm UTC](https://community.inventables.com/t/3d-carving-a-free-grabcad-step-file-with-fusion-360/26847/7 "2016-08-15T14:00:43Z")

</div>

verry nicely done !!!

---

<div class="post-metadata">

**Author:** ![DavidSpencer](https://avatars.discourse-cdn.com/v4/letter/d/ccd318/32.png) [@DavidSpencer](https://community.inventables.com/u/DavidSpencer)\
**Post date:** [August 16, 2016, 8:08pm UTC](https://community.inventables.com/t/3d-carving-a-free-grabcad-step-file-with-fusion-360/26847/8 "2016-08-16T20:08:20Z")

</div>

How thick was that piece of wood, it looks like its 2" thick. probably an optical illusion.

---

<div class="post-metadata">

**Author:** ![DavidSpencer](https://avatars.discourse-cdn.com/v4/letter/d/ccd318/32.png) [@DavidSpencer](https://community.inventables.com/u/DavidSpencer)\
**Post date:** [August 16, 2016, 8:36pm UTC](https://community.inventables.com/t/3d-carving-a-free-grabcad-step-file-with-fusion-360/26847/10 "2016-08-16T20:36:05Z")

</div>

Man that picture looks really thick, what scale tool did you use.

---

<div class="post-metadata">

**Author:** ![DavidSpencer](https://avatars.discourse-cdn.com/v4/letter/d/ccd318/32.png) [@DavidSpencer](https://community.inventables.com/u/DavidSpencer)\
**Post date:** [August 16, 2016, 9:02pm UTC](https://community.inventables.com/t/3d-carving-a-free-grabcad-step-file-with-fusion-360/26847/12 "2016-08-16T21:02:50Z")

</div>

in what program? Or on the grabcad site.