# 1000mm X-Carve (Norwich, UK)

**URL:** <https://community.inventables.com/t/1000mm-x-carve-norwich-uk/115636>\
**Category:** For Sale and Trade\
**Created:** [March 21, 2021, 10:21pm UTC](https://community.inventables.com/t/1000mm-x-carve-norwich-uk/115636 "2021-03-21T22:21:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![RhysHartle](https://avatars.discourse-cdn.com/v4/letter/r/54ee81/32.png) [@RhysHartle](https://community.inventables.com/u/RhysHartle)\
**Post date:** [March 21, 2021, 10:21pm UTC](https://community.inventables.com/t/1000mm-x-carve-norwich-uk/115636/1 "2021-03-21T22:21:52Z")

</div>

Hello all

I’m looking to sell my X-Carve as don’t use it as much as I would like due to time constraints. It’s in excellent condition, all parts move freely and as they should. It has had very little use over the 2.5 years I’ve owned it. The spoil board is original one it came with, and you’ll see that it’s not completely ruined, proving its little use.

This is the newer X-Carve with the X-Controller and DeWalt router. I purchased the CNC from RobySavvy for just under £2000. Please note, the aluminium table which I custom built for the CNC is not included within the price due to it’s high original cost. I will use this for something else unless an offer is made to purchase it too.

Collection is from Norwich, Norfolk (United Kingdom). Viewings are welcome.

£1100

 ![image00002](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/c/9/c9fdef82840d79d8401972abc74d15a84ddb96a2.jpeg) ![image00003](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/1/8/18fb05534fe197df12e83c8ed4708f49b49b01fe.jpeg) ![image00004](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/5/e/5e7814f41c5194ea4d11fb902129520fd7ca98c6.jpeg) ![image00005](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/9/0/9043758962cf673d6ed3bd12712f1516dcdfc0ca.jpeg) ![image00006](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/b/5/b5d8ae9cc18ef5f33de37dd3f42c107908ef7972.jpeg) ![image00007](https://canada1.discourse-cdn.com/flex009/uploads/inventables/original/3X/9/9/9930507729846e7653213724cbd842c7aba69312.jpeg)

---

<div class="post-metadata">

**Author:** ![system](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/system/32/67217_2.png) [@system](https://community.inventables.com/u/system)\
**Post date:** [June 21, 2021, 4:22am UTC](https://community.inventables.com/t/1000mm-x-carve-norwich-uk/115636/2 "2021-06-21T04:22:24Z")

</div>

This topic was automatically closed 91 days after the last reply. New replies are no longer allowed.