# 1000mm X-Carve for sale (Pensacola, FL) $1000 - Local Pickup Only

**URL:** <https://community.inventables.com/t/1000mm-x-carve-for-sale-pensacola-fl-1000-local-pickup-only/43007>\
**Category:** For Sale and Trade\
**Created:** [October 2, 2017, 4:05pm UTC](https://community.inventables.com/t/1000mm-x-carve-for-sale-pensacola-fl-1000-local-pickup-only/43007 "2017-10-02T16:05:38Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![StuartBradley](https://yyz1.discourse-cdn.com/flex009/user_avatar/community.inventables.com/stuartbradley/32/45892_2.png) [@StuartBradley](https://community.inventables.com/u/StuartBradley)\
**Post date:** [October 2, 2017, 4:05pm UTC](https://community.inventables.com/t/1000mm-x-carve-for-sale-pensacola-fl-1000-local-pickup-only/43007/1 "2017-10-02T16:05:38Z")

</div>

Gauging interest here. For sale is a fully assembled and functioning 1000mm X-Carve with a Dewalt 611 router. I bought the machine in November of 2015. No additional upgrades have been made to the machine, nor has it been used much since then. I used the machine for approximately 10 hours doing various things but then got a job where I travel a tremendous amount and haven’t touched it since. Paid $1600 (shipping included) and included with my order from Inventables was:

X-Carve  
X-Carve 1000mm Rail Kit  
X-Carve ACME Lead Screw Kit  
X-Carve 1000mm Waste Board Kit  
X-Carve NEMA 23 Stepper Motor Kit  
X-Carve DeWalt 611 Spindle and Mount  
X-Carve Arduino/gShield Motion Controller Kit  
X-Carve Power Supply Kit  
X-Carve 1000mm Wiring Kit  
X-Carve 1000mm Drag Chain Kit  
X-Carve Limit Switch Kit  
X-Carve Tool Kit  
X-Carve Clamp Set  
High Speed Steel 2 Flute Upcut Spiral  
Solid Carbide 2 Flute Spiral Upcut (Ball Nose End)  
X-Carve Digital Calipers

There are some marks on the wasteboard but nothing catostrophic. Either reply here or email me at [atstubradley@gmail.com](mailto:atstubradley@gmail.com) Thanks

---

<div class="post-metadata">

**Author:** ![DavidMyer](https://avatars.discourse-cdn.com/v4/letter/d/85f322/32.png) [@DavidMyer](https://community.inventables.com/u/DavidMyer)\
**Post date:** [October 14, 2017, 11:38pm UTC](https://community.inventables.com/t/1000mm-x-carve-for-sale-pensacola-fl-1000-local-pickup-only/43007/2 "2017-10-14T23:38:12Z")

</div>

If the unit is still available text/call me at 770-241-8235. Ready to buy asap

---

<div class="post-metadata">

**Author:** ![EddieBratton](https://avatars.discourse-cdn.com/v4/letter/e/57b2e6/32.png) [@EddieBratton](https://community.inventables.com/u/EddieBratton)\
**Post date:** [November 21, 2017, 8:51pm UTC](https://community.inventables.com/t/1000mm-x-carve-for-sale-pensacola-fl-1000-local-pickup-only/43007/3 "2017-11-21T20:51:36Z")

</div>

If the machine is available, I would like to know. Please text me at 205 902-7558.

---

<div class="post-metadata">

**Author:** ![DonYea](https://avatars.discourse-cdn.com/v4/letter/d/a5b964/32.png) [@DonYea](https://community.inventables.com/u/DonYea)\
**Post date:** [December 14, 2017, 7:54pm UTC](https://community.inventables.com/t/1000mm-x-carve-for-sale-pensacola-fl-1000-local-pickup-only/43007/4 "2017-12-14T19:54:01Z")

</div>

Still for sale?

---

<div class="post-metadata">

**Author:** ![EddieBratton](https://avatars.discourse-cdn.com/v4/letter/e/57b2e6/32.png) [@EddieBratton](https://community.inventables.com/u/EddieBratton)\
**Post date:** [January 6, 2018, 2:32am UTC](https://community.inventables.com/t/1000mm-x-carve-for-sale-pensacola-fl-1000-local-pickup-only/43007/5 "2018-01-06T02:32:37Z")

</div>

I responded in Nov asking if the unit was available, but no response. Is it available for purchase?